Riverside County Live Bait Tank Pump Setup

How Weather Patterns Can Affect Fishing On The Water

Fishing is a great way to spend per day. To become a great fisherman may seem like a difficult task, however, like many skills this simple requires some practice and basic knowledge. There are numerous great spots to go fishing through out the Riverside County area, and in nearby mountains. In this short article, we provide several tips to be of assistance in becoming a better fisherman. The following article will show you the best way to increase your haul in such a way that you just never imagined.

Should you use shad and bottom fishing, cut the tail away from the shad before baiting your hook. This prevents the bait from tangling as a result of spin because it goes further in to the water. Moreover, the scent of your cut tail can help to attract fish on it.

Casting on the shore of any river or lake around Riverside County can often net the greatest results. Fish who rely on insects for food generally discover them in abundance near to the shore, to have more bites by casting your lure during these areas. However, if you cast close to the shoreline, you must take care not to tangle your line in weeds or debris.

Choose an inverse color for your personal bait in the color of water. Many fisherman prefer to use live bait kept in a live bait carrier, because fresh bait will normally yield better quality fishing. If the water is murky, use light colored bait that it is visible on the fish. On the other hand, if the water is obvious, ensure that you use darker colored bait.

When fishing, sit in the location for at least half an hour before stopping. Oftentimes, you must supply the scent of your bait a chance to travel and you must provide the fish in the water time and energy to locate your line. In the event you don’t wait a minimum of half an hour with this to occur, you could possibly neglect some very nice catches.

Always pack extra supplies of food and water, especially on hot days. Sitting in the sun for several hours at the same time can drain your whole body, so it is essential that you continue it replenished to maintain your power levels. Bring snacks plus some meals, depending on how long you plan to keep out.

aerated minnow bucket

Which means you made our minds up you would like to take up fishing like a hobby. If you are just starting with fishing, you should maintain your equipment pretty simple. It all depends on what you are actually form of fish you are fishing for with regards to equipment. Most beginners begin with lightweight tackle. The main beginner’s equipment will include a rod and reel, 12 lb. test line, small and medium sized hooks (for live bait fishing), several bobbers, a couple of artificial lures, some sinkers, a pair of pliers, a net, along with a pocket knife. Don’t forget to examine your state’s laws to discover should you need a fishing license for the body of water in which you anticipate fishing.

Make sure to use correct casting technique while you are fly fishing. You must have approximately 20 feet of line out before you if you cast. Stay away from jerky motions, and cast a straight line. Above all, try and relax which means that your tense muscles will not likely ruin your casting.

Make sure to match the size of your bait to the size of the fish you are trying to catch. The logic behind this really is simple — small fish pursue small bait, while larger fish will chase larger kinds of bait. Bluegill and Crappie make good bait for larger fish including Muskie and Pike.

Fishing is really a sport with universal appeal. Fishing is the best way to relax and enjoy yourself, in addition to relieving difficulties with anxiety or stress. Successful fishing is often a combination of techniques, patience and luck. If you are using the recommendation you possess read, you might be on the right track to becoming a skilled fisherman.

The Best Lures to Use In Fishing

bait basket

Spinnerbaits are not just a tool for the spring and fall. Spinnerbaits can be deadly, if the right ones are fished in a variety of situations whether it be the East Coast or the West. The trick is to be able to distinguish which is the right one for the right situation? Spinnerbaits can fished in so many different ways, all of which, produce BIG BASS from north to south, east to west. They can be fished through the water column top to bottom. They are really a versatile bait if you know the little tricks it takes to fish them effectively. They can be fished many ways by varying the retrieve, weight of the bait, blade size, the trailer and colors. You have a bait here that can work a water column and catch fish from one to twenty-five feet, and because it is so versatile, you can fish it fast, slow, and in all seasons of the year.

The first time I discovered this, I was amazed at how many fish I had must have missed in my youth, by not knowing how to fish a spinnerbait here in the Northeast.

When it was October here in Delaware, I went hunting until the end of Quail season. Soon after 1976, I read my first issue of Basssmaster magazine, and saw that people were using this bait year round and catching bass. Soon after, in late December in Delaware, I caught my first bass on a “Stan Sloan” single nickel colorado blade,(with a purple skirt, with rattles on the arm,) by letting it flutter into a sunken tree, in ten foot deep, thirty-six degree water. I soon felt that sluggish pull on the line, “like a pile of leaves or grass”, not until then, did I realize that I could catch bass year round on the right lures, with the right presentation, sound and color. It was well over six pounds, and was a different fight when she got close to the boat and saw the trolling motor. Since that time I have fished all over the United States, from New York to California, and found the right spinnerbait and the right technique produces big bass from all sorts of waters all year long. They key is to keep it in the strike zone, and most lures are made so that you can work them as slowly as you want to, while still keeping them in the zone.

“DIFFERENT TECHNIQUES”

I like to use the spinnerbait as a search tool, and kind of a depth finder, and bottom contour device also. What I do is check out the structure of the lake by bumping objects, and increasing my chance for a reaction strike right then. The spinnerbait will make a different sound bumping off different objects such as stumps, rocks, sand, and pea gravel.I also vary the speed often, and even shake the rod if necessary, trying to give the bass a different look, which is important in highly pressured waters. I work buzzbaits in a different manner also, which I believe is what accounts for some real lunkers that I might have otherwise missed. There are times when a spinnerbait is the most effective tool to use. When fishing the bait in heavy cover such as pads, I employ a technique that I now know is called fluttering by some anglers.

Basically what you do is to cast the spinnerbait out into the pads, and by moving your rod tip, and other parts of your body positioning, you maneuver the bait through the pads, and when it comes to an opening, stop it, and let it flutter down. Many strikes comes as a lure sinks.You should make a lot of casts to the areas where you really believe the bass are, or have seen them, as they can be irritated into striking if the bait is presented in enough variations and positions. Slow rolling can be extremely effective in deep water as it designed to imitate a crawfish on the bottom, or another type of bass forage. The trick to it is rolling it down the side of a sloping bank, a rock bar, a hump, or any underwater structure, and then slowly pumping it back to the boat. I employ the almost identical technique with a lipless crankbait with great success. There are also better types of spinnerbaits for different types of cover. C shaped baits tend to work better through heavy pads and grass, while a V shaped bait gets hung up more easily.

Riprap is another good area to slow roll spinnnerbaits. Sometimes there is debris mixed in with the rocks, and many times large bass are waiting to attack prey that come along, and are primes areas to slow-roll spinnerbaits. The spinnerbaits should be slow rolled over the rocks and such, and extra action is not really necessary. It should crawl over the bottom, and sometimes I give it a little twitch. All you have to do is raise the rod a slightly, lightly shake it, and then continue slowrolling it back to the boat.

“DEEP METHODS”

When the bass are really deep I employ a technique I call deep pulling; its like a yo-yo method but a little different. I let the bait flutter all the way down, and then let it sit, then I pull it hard and way up near the surface and do it again. I use real heavy baits with Colorado blades for this, usually in a chartreuse, or a chartreuse and white skirt when I fish in places that have dying shad in the winter, but anywhere else, I use black, or black/purple combinations. I always add a little Megastrike to the baits.

“TACKLE”

I like to use a 6 1/2 foot rod for this but sometimes I use a 7 foot rod, on different occasions. Many times situations come up when a 7 foot rod suits the situation better that a 6 or 6 1/2 foot rod for distance and control. Most of my rods I use for this technique are in a medium heavy action. I really like a Fiberglass rod for these baits, but there are many new rods that are very good for spinnerbaits and crankbaits, made by G.Loomis, St.Croix, Kistler,and Shimano. Sometimes on the smaller baits I use a spinning rod with Stren Super Braid,or Power Pro, but the rest of the time I use a baitcasting rod with a Shimano Chronarch, with fourteen to twenty pound P-Line or Bass Pro Shops line.

WHAT COLORS FOR WHAT BAIT

When I choose a color for a spinnerbait, a lot of factors come in to play. The first thing I do is pick a shad pattern, or whatever is the dominate species in the lake. I usually double up the skirts, to give them more bulk. I use blue and white, black and white, and chartreuse and white. Sometimes I use red, depending on the location. All of these colors give a good range of visibility under water.

In muddy water, I have always used the same colors, black and blue and red. The same goes for the nighttime. I like to use the forage in the lake if I can, such as rainbow trout or shad, and to make it appear injured to trigger that genetic response, but only if the water isn’t muddy. In muddy water I stick to black almost exclusively.

I like to use big spinnerbaits in the spring, when I’m in big fish waters, some right here in Delaware or Maryland, or others such as Florida, Arizona, Texas, and Mexico. When fishing strictly for big bass with spinnerbaits I add on a double or triple skirt for bulk and lift, and use really big blades. Terminator makes some big blades that I really like on our spinnerbaits. This year here in Delaware, I landed three bass in one day on big spinnerbaits, that went seven and eight pounds. Sometimes we even break off the tails of worms for trailers, and many times in the spring, I have caught some huge bass from ten inches of muddy water with a big spinnerbait with a trailer. The new Skeet Reese Redemption is another great spinnerbait and I use that with a Colorado blade in cold and/or muddy water.

I have had a great response from bass in the Delaware, Maryland, New Jersey, New York, and Pennsylvania areas, using a double golden shiner skirt. The bluegill and shad patterns top the list overall though. Sometimes reversing the skirts on the baits presents a different profile, and will also trigger hard to get strikes. The spinnerbait isn’t just a bait for beginners, although it is a great bait to break in a novice or child to the sport of bass fishing. But in the hands of an expert, it is a versatile year round bait, that can catch “HUGE” bass.


La Quinta How To Build A Live Bait Well

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in La Quinta, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in La Quinta with your kids.

minnow basket

La Quinta Live Bait Well

bait tanks for boats

The Conveniences Of An Angling Overview

“Bait truck’s coming this afternoon, you need any bait Benjoy?” Morris lit a Marlboro and squinted southward looking for the last boat in.

“Thanks, me and Mick’s going run over to the factory and get a load.” I gave the stacks of empty five-gallon buckets a nudge with my foot.

Bait on the wharf was thirty-five dollars for five bushels. John always heaped the old wooden wheeled barrow when he came to dump bait for Dickie and Mick and me so there was usually closer to seven bushels than five when we got done shoveling it into the 55 gallon drums but bait was only two dollars a bushel if we went to the factory and hauled our own.

The cannery in Bass Harbor had closed down a few years ago. Up and down the coast the herring, like the cod fishery, the haddock, the menhaden, the alewives, the salmon, the striped bass, and the tuna were on the wane if not already exited stage left, but the factory in Southwest Harbor was still a going concern. Summer and fall the herring boats came in from where they’d vacuumed up a load caught in seine nets in open water or shut off in a cove, net by net, until they were packed almost as tight in the water as what they would be in the can. Then the factory whistle blew to call in the ladies to snip the heads and tails and pack them in oil or mustard sauce or with chilies.

Mick spun around in the gravel parking lot and reversed through the dust cloud. The group of tourists admiring the view scattered. The painting group in front of the old post-office just above the wharf turned like a flock of gulls. Morris just sat back on an empty lobster crate and lit another smoke.

At the factory Billy opened a sluice gate and let a cascade of heads and tails pour into our buckets and barrels. He watched Mick carry two five-gallon buckets, slopping full, in each hand.

“That boy is a regular force of nature,” said Billy. Billy organized the pignic each year. He rigged a pair of motors and gears his grandfather got out of a lighthouse to turn the spits. The volunteer fire department was mostly there tending the fires and the kegs but the police found somewhere else to patrol that weekend. Billy knew all about forces of nature.

“If you told him another fella carried three, he’d do it,” I said.

Billy eyed the buckets but here was only four left.

Back at the wharf Dickie watched me dump layers of fish in the rusted fifty-five gallon drums while Mick shoveled in layers of salt.

“I didn’t see you to ask if you wanted us to pick up any for you,” Mick said.

“I’m still using up what frozen bait I got. I run down to the freezer yesterday.” Dickie nodded toward the stack of white boxes in his stall. “Top ones oughta be thawed out enough to haul with tomorrow. You planning on using that tomorrow you want to make sure you touch give her a touch of salt.”

“I got fresh set aside already for tomorrow. I made sure Benjoy got his out too,” said Mick.

The wharf was quiet by the time I lowered my bait aboard and got ready to head back to the island. Morris watched me. “Ain’t you got a place you can keep bait out to the island?” he asked.

“Nah, no space.”

“You oughta build a little bait shed and wharf out there.”

“I fixed up a place to build traps, geez, the stink and holler about that, can’t imagine what they’d say about a bait shed. The shore’s not like it used to be.”

Morris nodded. “Used to be I could catch a mess of flounder any day while I waited for the boats. Bass Harbor, hasn’t been a bass up here in years. Whores eggs and punkins and sea cucumbers, fellas fishing now for what was trash back then.”

“I wonder what they’ll use for bait when they get down to the plankton,” I said.

Morris give me a long look. “Rate we’re going it won’t be long. Not long for fish or men,” he said.

La Quinta

Fishing Rods Review


Riverside County Live Bait Tank Pump Setup

Banning Wholesale Fish Bait

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Banning, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Banning with your kids.

live bait tank pump

Banning Live Bait Well

bait tanks for boats

Avoiding Backlash When Using Bait-Casting Reels

Being the co-CEO and trustee of Otto Bremer Trust, Daniel Reardon is tasked with the management and maintenance of every aspect of the foundation. This includes overseeing Otto Bremer Trust’s responsibilities as a Bank Holding Company, as well as fostering its relationship with regulators and investors. When he is not working, Daniel Reardon enjoys going fishing.

The bait-casting reel is specifically designed for the more seasoned angler. Ideal for heavy lures and bait, it is the tackle of choice for catching larger types of fish. One advantage of the bait-casting reel is its versatility allowing for more accurate measurements when casting a specific distance. The only downside to bait-casting reels is that they can lead to what anglers call a bird’s nest, technically known as backlash.

Backlash occurs when the lure slows down as it descends towards the water, but the spool continues to spin faster. Once this happens, the angler has to spend time untangling the line, leaving them less time to actually catch any fish. Preventing backlashes, however, is easy with these tips:

1. Use heavier lures. When a lure is too light for the force of the caster, the spool will not receive any resistance, causing it to spin faster and end up in a bird’s nest.

2. Choose a high-quality fishing line. For example, using a braided line will cause tighter backlashes that are harder to detangle. Fluorocarbon lines end up backlashing more than monofilaments; however, monofilaments are better suited for practice than for actually catching heavier fish.

3. Avoid casting lines into the wind. The force of the wind may slow down the lure, which causes the spool to spin too quickly before the line drops into the water.

4. Customize the brake setting of the fishing rod. Modern rods have adjustable brakes to prevent backlashes. Beginners should start at the highest setting until they feel comfortable enough to cast their line greater distances.

Banning

Avoiding Backlash When Using Bait-Casting Reels


Riverside County Live Bait Tank Pump Setup

Menifee Fish Live Wells For Sale

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Menifee, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Menifee with your kids.

bait casters

Menifee Live Bait Well

kayak minnow bucket

Great Bass Fishing Tips

DIY Nuc Plans

Beekeeping is a very rewarding hobby, just think about all that delicious, golden honey flowing, mmm! Those of us that have been keeping bees for any time knows that you eventually need to start splitting your hives to prevent them from swarming. Another advantage of splitting is to make a new hive for another beginner to start their own apiary. Perhaps you are an adventurous type and are interested in rearing your own queens.

What ever your motivation is for slitting your hives, you will need the proper equipment to do so. One of the most important pieces of equipment you will need is the box, and that is where your nucs come in very handy. A nuc is a smaller bee box that makes it easier for a fledgling colony of bees to get a strong start. The problem is that they aren't exactly cheap, especially if you are buying several at a time.

This lens is dedicated to teaching you how to make your own nucs!

Step 1: Cutting Your Wood

Making the puzzle pieces

The first step is the most time consuming, especially if you have never done this before. Once you have made a nuc or two, it starts to become a breeze. If you study the picture carefully, it has every piece laid out on a 2' x 4' piece of plywood. Personally, I use 3/4 inch plywood from Lowe's or Home Depot. I tried 1/2 but it didn't seem to hold up on the joints nearly as well. Spend a few extra dollars for the good stuff, your bees will thank you.

Let me list out the dimensions of the pieces, just in case you can't quite read them in the picture. The parts are from left to right:

2 Front Walls - 7 1/2 x 9 1/2 (you will actually get three from the cut outs)

2 Front Tops - 9 x 2 1/2 (these become the handles of the box)

2 Side Walls - 10 1/2 x 19 3/4

1 Top - 9 x 22 3/4

1 Bottom - 9 x 24 (can be shorter if you like smaller landing areas for your bees)

Once you have cut the pieces you are ready to start your assembly. Yes, that's it, no more cutting or routing or anything else!

How to start beekeeping

Here are several books that will teach you everything you need to know about beekeeping, but don't forget, join a local beekeepers guild!

Step 2: Adding Sides

It starts looking like a box

There are several styles of putting the box together, but it really comes down to nails or screws. Nails are a bit easier to use, but the screws will last much longer. Personally, I've chosen to put a bit more effort into it and use the screws.

One word of caution if you do choose to use screws. Due to the fact that you are driving them into the end and side of a laminated piece of wood, it is strongly advised to drill a pilot hole before you actually drive your screws. This will keep the wood from cracking. It is also advisable to drive the screws or nails as straight as you possibly can so you won't have sharp objects poking out ready to impale you. Oddly enough, this tip is more for you than your bees. You will never hear your bees mumbling about the hive about pointy objects that they stubbed their toes on, but you will certainly hear about the beekeeper that ripped his jacket and let a good number of bees sneak in and sting him!

This step would be a tad easier if you had a third arm (as many tasks would) but it really isn't that bad. All you need to do at this point is to attach the sides to the OUTSIDE edges of the front and back. It is important to attach it to the outside or your nuc won't be wide enough to accommodate the five frames you need. I usually use two screws at each joint, you may want to add a third but watch out that you don't apply too much pressure and split the wood.

Step 3: Adding Handles

The handles double as the frame ledge too!

The part I love most about this design is that the handles actually double as the ledge that the frames rest on. Many other designs require that you use routers or other fancy techniques, but this is much easier.

Take the smallest pieces of the cutout and place it on the front flush with the top of the sides. It will overlap slightly with the front panel and the be flush with the outside of the side walls. Screw it in place with one screw on each side. Again, you may want to add an extra screw to give you a warm and fuzzy feeling, but one usually does the trick.

Flip the box over and repeat for the back handle and ledge.

Step 4: Attaching the bottom board

Even bees need a floor

Technically speaking, this step is optional. Sometimes you want to make a second story to a nuc that you already have going. In that case you wouldn't need a bottom board at all. It will simply set on top of the current nuc just like a normal size hive has many boxes stacked on top of each other.

If you do choose to add the bottom, flip the box over and lay the bottom board on it. You need to decide which end will be the front. The extra length of the bottom board will hang over on the front end. This will eventually become the landing pad for your bees. Once again, screw this onto the box, usually one screw on the end and two on each side.

I used to screw on the front until I started ruining my drill bits in the next step. You see, if you put the screw through the center of the front then when you drill the entrance hole you will drill right through your screw. Not a pretty site seeing your bits all chewed up. With a bit of experimentation, I discovered that it doesn't really help much to even have a screw on the front.

Step 5: Drilling holes

The bees need a door right?

The size and location of your entrance does actually matter. First, if you ask 5 different beekeepers what the right size of entrance holes is you will probably get 6 answers. I make my entrances 3/8 of an inch for three reasons: 1) it gives them plenty of room to come and go, 2) it is small enough to defend against pests and robber bees, and 3) most rodents have trouble getting through that size of a hole when seeking shelter.

As far as the location of the front entrance, be very careful when deciding where you place it! I have heard of people leaving up to an inch between the bottom board and the hole. This plan has a solid bottom board which does not give anywhere for water drainage. If you aren't careful, you could end up with an inch of bee soup in the bottom of your hive instead of honey.

I put my front entrance as close to the bottom board as possible. This allows for adequate drainage. The rear entrance is typically an inch or so under the rear handle. I leave this room just in case I need to move the box and a handful of bees have decided to hang out on the back porch. It is important that you do drill both openings, it will provide much better ventilation for the hive.

Step 6: Making the lid

The last step!

The lid is the easiest part of the entire job. Simply take the last remaining piece and screw two pieces of scrap, that you have from the cutting step, to the ends of the top piece and **poof** you have a lid. The only mistake that I have ever made in this step was not doing a test fitting before I screwed the scraps on. It is a good idea just as a sanity check to make sure that the lid will actually fit on top before you screw them down.

Bonus Step: Adding Bees!

Here comes the fun!

While it is rewarding to be able to make your own nuc boxes, it is fairly boring to watch an empty box. Go out and find a swarm or get in touch with your local beekeeping guild so you will have some little critters that call your box a home. They will love your newest creation, I promise!

What makes good nuc boxes?

When you are looking at buying or building a nuc box you should consider a few things. The box should fit snugly with the lid. The last thing you want is to have a gust of wind blow the roof off of your honey bees' house. The lid should also fit flush with the rest of the hive. If there is any bowing of the lid it can lend itself to not keeping crucial heat in during winter months. The entrance should not be too large. It doesn't take much of a space for the workers to come and go, so keep it small so rodents can't get in. It also makes it easier for the bees to protect their hive.

DIY Nuc Box

Why build your own?

The answer is quite simple, it is much cheaper. The nucs that I used to buy, not counting shipping, was about $25. The ones that I make now are $3.50. Holy savings batman!

Beekeeping can become a very expensive hobby. Many people say that there is no money in keeping bees but that isn't really true. The people that shell out tons of cash are the ones that buy overpriced equipment. If you are frugal with this hobby, it will definitely pay for itself many times over.

Nuc Box as a Bait Hive

Catching wild swarms of bees

If you are looking to expand the number of bee hives that you have, a nuc box is one of the best tools you can use. Select a wooded area that is fairly easy to get access to to place your swarm box. Put a piece of old comb in the box with a few frames and strap the box about 10 feet off the ground in a tree. A swarm is more likely to pick this box than other places because it smells like an old hive was there because of the comb and because it is up off the ground.

This method can bring you a few extra hives a year if done correctly. Hey, who doesn't like free bees!

I'd love to hear from you and your experiences making your nucs. Do you have any other plans that you have had luck with? Let me know and I will feature it for you!

Menifee

Catching Big Winter Bass


Riverside County Live Bait Tank Pump Setup

Beaumont Livewell Setup

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Beaumont, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Beaumont with your kids.

bait tanks for boats

Beaumont Live Bait Well

minnow basket

Fishing Rods Review

Screwlock Style Shakey Head

Dirty Jigs Stand Up Finesse Head 5/0 4pk

Finesse fishing has become very popular, and more and more anglers are finding new applications for the technique. The trend of “finesse” fishing with 5" and bigger worms along with craw style baits has gained a lot of attention recently. Dirty Jigs considered this when designing the new Dirty Jig Stand Up Finesse Head. Featuring a larger 5/0 Mustad Ultra Point Jig Hook with a 60-degree flat eye — whether you want to rig a Hag’s Tornado, a Power Team Lures 5" Finicky Tickler or 3.5" Craw D’oeuvre, even all the way up to the Power Team Lures 10" Ribbon Hinge Worm, the Dirty Jigs Stand Up Finesse Head has you covered. Available in several colors, the Dirty Jigs Standup 5/0 Finesse Head also features a recessed line tie to protect your knot and a convenient cork screw keeper.

Traditional Style Shakey Head

Bite Me Finesse Shakey Jig 4pk

Highly effective around pressured or spooked fish, the Bite Me Finesse Shakey Jig provides a scaled-down shakey head presentation that excels on those extra-tough days. Molded around a 2/0 Gamakatsu sproat hook, the Bite Me Finesse Shakey Jig features a short shank that better suits smaller worms, craws, and creature baits. 
 
 To keep those mini plastics locked in place, the Bite Me Finesse Shakey Jig is equipped with a longer-than-normal baitkeeper barb, which also eliminates the need for any messy glues. If the hook keeper is too long, simply trim it back with a quick snip of the cutters. A must-have for targeting finicky bass, the Bite Me Finesse Shakey Jig delivers bite-sized performance that puts fish in the boat when other techniques fall short.

Gamakatsu Ball Head

Gamakatsu Round Jig Head 5pk

Ball heads are useful for a variety of soft plastic baits and these heads feature the ultra-sharp Gamakatsu hooks for positive hookups. Everyone knows about the legendary Gamakatsu hooks and this level of sharpness is exactly what you need especially when fishing with light lines and on deep structure. These heads offer the angler a choice of hook and weight combinations so you can get the perfect Gamakatsu Ball Head for your situation. The double keeper collar means the plastic will stay where it belongs even when you’re pulling it through rough structure and gnarly cover. Use the Ball Head with plastic worms either open hooked or ‘Tex-sposed’, for swimming a grub, for a finesse presentation of a creature bait, or for tying your own jigs. The Gamakatsu Ball Head will give good results every time.

These are authentic product from Gamakatsu, not just someone using Gamakatsu hooks in their heads.

Football Head W/ Weedguard

BOSS Football Jig Head 4pk

The BOSS Football Jigs Head features a custom paint job, large skirt cone and built in plastics keeper. The BOSS Football Jig Head is backed with a 4/0 Mustad Ultra Point Hook in the 1/2oz size and a 5/0 in the 3/4oz. A top grade weedguard is secured, remember not all jig weedguards are the same. All BOSS jig heads feature an unmatched custom 5 step paint job.

For more tips and tricks on rigging skirts check out this video of Gary Klein discussing BOSS Skirting

If you are looking for any skirt material to customize your jigs, don’t forget to check out Skirts Unlimited Skirting Material.

Football Head Plain Style

Yamamoto Football Jig Head Gamakatsu 4/0

Football jig heads are the perfect complement to spider jigs and these Yamamoto Football Heads are a perfect match for the Yamamoto Hula Grubs. The Yamamoto Football Jig Heads come with two different hook choices, a heavier wire, longer shank Gamakatsu hook and a lighter wire, shorter shank Owner hook. Although the Gamakatsu hook is listed as 4/0 and the Owner hook is 5/0 due to the differences in measuring hook size between the two companies, both these hooks have the same gap. In other words, they both have the same distance between the point and the shank. The plastic spider jigs stay firmly in place with ring type bait keepers so you won’t pull the plastic down even when dragging it over a rough bottom.

Darthead Painted

Revenge Darter Hedz 3pk

The Revenge Darter Headz feature exceptionally realistic detailing on their life-like heads, complete with 3D eyes for added authenticity. A durable chip resistant coating uses color-shifting metallic pigments to imitate real bait and provide long lasting durability. Available in a multitude of color schemes to match your local forage and favorite soft plastic bait. The Mustad Ultra-Point Black Nickel Round Bend Hooks supply rock solid hooksets so more bass end up in the boat.

Darthead Unpainted

Owner Ultrahead Darter Heads 5pk

Putting a worm on a darter head can be a great fish-catching rig, especially for finesse style fishing or when the fish won’t bite a standard Texas-rig. The darter head will hop and bounce along the bottom with fish attracting undulations in the worm and can be quickly and efficiently worked along any bottom that is relatively clear of sticks or grass. With the Owner Ultrahead Darter Heads you have the advantage of a premium fish catching and fish holding hook on the end of your rig ensuring you the confidence of getting the fish into the boat when it bites. If you like using a darter head rig you’ll love these rigs.

Beaumont

My Time with Captain Billy: A Vanishing Way of Life in the Heart of the Chesapeake


Riverside County Live Bait Tank Pump Setup

Moreno Valley Fishing With Crabs As Bait

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Moreno Valley, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Moreno Valley with your kids.

bait cast reel

Moreno Valley Live Bait Well

30 gallon bait tank

The Conveniences Of An Angling Overview

Fishing can be a phenomenal and fun activity for children and youngsters in Khasab. Fishing is a compensating sport; your family can make tracks in an opposite direction from hectic routines to enjoy the outside air, find out about the earth, and even create persistence. Best of all, fishing is quality time spent together talking, laughing and sitting discreetly next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically.

Here are some of the important points through which you can make your fishing trip successful in Khasab with your kids.

1. Location

In case you’re fishing from shore, discover an effortlessly available area. A short drive and a short stroll to your spot are ideal; recall, the objective is to acquaint an extraordinary game with your new fisherman. You don’t need your youngster so drained when you arrive that he or she will be miserable and not able to appreciate fishing.

During this presentation procedure, set your kid up for accomplishment by picking a spot where you know there are fish. On the off chance that conceivable, pick a shallow zone where minor fish can be seen.

2. Time Your Trip

The period of time spent fishing will be dictated by your kid’s age. Be set up to remain just the length of your child is interested; perhaps a half hour or so on your first trip. Try not to transform what can be another experience into a difficult marathon for your little one.

3. Snare, Line, and Sinker

Provide your kid with simple to-utilize handle. There are an assortment of basic posts accessible composed particularly for little children. These short poles, once in a while with child agreeable characters, are engaging and less disappointing for little hands.

It will be physically unthinkable for your young youngster to snare the worm, cast the line, and reel in the fish alone. There are approaches to beat these impediments. You can cast for your youngster and after that give your kid the bar. You can likewise connect a sinker so your youngster can discharge the line straight into the water.

4. Supplies

Make a rundown to confirm with your youngster the provisions you will require. Incorporate things, for example, sustenance, water, sunscreen, emergency treatment outfit, lifejackets, and a camera.

5. Remain Safe

Water mishaps are particularly worried to guardians of youthful kids. While selecting your fishing spot, search for stable ground and know about dangers, for example, shakes that kids could slip on into the water. In case you’re fishing close quick moving water or from a vessel, kids ought to dependably wear individual flotation devices, ordinarily called life vests. Educate your youngster security systems, for example, bringing down the bar and keeping it underneath the midsection.

Moreno Valley

Check Out A Few Of These Great Fishing Tips!


Riverside County Live Bait Tank Pump Setup

Blythe Casting Live Bait

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Blythe, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Blythe with your kids.

live well for kayak

Blythe Live Bait Well

fishing bait containers

How to Build a Box Trap

When you live in Texas, there doesn’t need to be a fishing offseason. While most outdoorsmen put fishing on hold to hunt during the winter, I believe it is the best time of the year to catch monster bass. Find out how to land your next lunker with these simple tips.

Use Bigger, Slower Lures

It is pretty standard knowledge that bass slow down and move far less when the water gets colder, which is why it is important to use a slower bait when fishing in the winter. What most anglers forget is that a bigger bait is also essential for landing winter bass. Since the fish do not want to move as much, they seize every opportunity they get to take down a large meal. Big spinners and crankbaits will attract the bigger bass that are in search of hunting one large meal instead of chasing small baitfish all day.

Find Warmer Water

It may seem like a no-brainer, but bass are attracted to warmer water during the winter. Look around for warm water sources like shallow areas, small creeks and rivers running into the lake, or power plant discharges. If you can’t seem to find any physical signs that there is a warm spot, keen your eyes peeled for baitfish on your fishfinder. Baitfish will flock to warm water areas despite the fact that they may become dinner for a predatory species.

Go Deep

If you can’t seem to find warmer water and are not having any success using big, slow lures, you may not be going deep enough. I always keep a deep-diving crankbait in my tackle box for when nothing else is working. Bass tend to go deeper when the water gets colder (except for when they find a hotspot) resulting in many anglers retrieving their baits right over top of the fish. A deeper diving crankbait may be the answer to your winter fishing woes.

Live Bait

When all else fails and you are at your wits end, try switching over to live bait. Although many anglers vow to never use live bait, there is nothing wrong with throwing a minnow or a nightcrawler onto a hook and seeing what happens. Make sure to keep your bait warm before you tie it on to ensure that you maximize its movement.

Stephen Geri is an avid fisherman who loves spending time outdoors with his grandchildren.

Blythe

Great Bass Fishing Tips


Riverside County Live Bait Tank Pump Setup

Murrieta Fishing With Crabs As Bait

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Murrieta, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Murrieta with your kids.

30 gallon bait tank

Murrieta Live Bait Well

30 gallon bait tank

Great Bass Fishing Tips

When you live in Texas, there doesn’t need to be a fishing offseason. While most outdoorsmen put fishing on hold to hunt during the winter, I believe it is the best time of the year to catch monster bass. Find out how to land your next lunker with these simple tips.

Use Bigger, Slower Lures

It is pretty standard knowledge that bass slow down and move far less when the water gets colder, which is why it is important to use a slower bait when fishing in the winter. What most anglers forget is that a bigger bait is also essential for landing winter bass. Since the fish do not want to move as much, they seize every opportunity they get to take down a large meal. Big spinners and crankbaits will attract the bigger bass that are in search of hunting one large meal instead of chasing small baitfish all day.

Find Warmer Water

It may seem like a no-brainer, but bass are attracted to warmer water during the winter. Look around for warm water sources like shallow areas, small creeks and rivers running into the lake, or power plant discharges. If you can’t seem to find any physical signs that there is a warm spot, keen your eyes peeled for baitfish on your fishfinder. Baitfish will flock to warm water areas despite the fact that they may become dinner for a predatory species.

Go Deep

If you can’t seem to find warmer water and are not having any success using big, slow lures, you may not be going deep enough. I always keep a deep-diving crankbait in my tackle box for when nothing else is working. Bass tend to go deeper when the water gets colder (except for when they find a hotspot) resulting in many anglers retrieving their baits right over top of the fish. A deeper diving crankbait may be the answer to your winter fishing woes.

Live Bait

When all else fails and you are at your wits end, try switching over to live bait. Although many anglers vow to never use live bait, there is nothing wrong with throwing a minnow or a nightcrawler onto a hook and seeing what happens. Make sure to keep your bait warm before you tie it on to ensure that you maximize its movement.

Stephen Geri is an avid fisherman who loves spending time outdoors with his grandchildren.

Murrieta

Best Ways To Go Fishing With Kids?


Riverside County Live Bait Tank Pump Setup

Calimesa Live Bait Fishing Tips

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Calimesa, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Calimesa with your kids.

bait bucket

Calimesa Live Bait Well

bait for fishing

Are You Using the Right Bait?

Spinnerbaits are not just a tool for the spring and fall. Spinnerbaits can be deadly, if the right ones are fished in a variety of situations whether it be the East Coast or the West. The trick is to be able to distinguish which is the right one for the right situation? Spinnerbaits can fished in so many different ways, all of which, produce BIG BASS from north to south, east to west. They can be fished through the water column top to bottom. They are really a versatile bait if you know the little tricks it takes to fish them effectively. They can be fished many ways by varying the retrieve, weight of the bait, blade size, the trailer and colors. You have a bait here that can work a water column and catch fish from one to twenty-five feet, and because it is so versatile, you can fish it fast, slow, and in all seasons of the year.

The first time I discovered this, I was amazed at how many fish I had must have missed in my youth, by not knowing how to fish a spinnerbait here in the Northeast.

When it was October here in Delaware, I went hunting until the end of Quail season. Soon after 1976, I read my first issue of Basssmaster magazine, and saw that people were using this bait year round and catching bass. Soon after, in late December in Delaware, I caught my first bass on a “Stan Sloan” single nickel colorado blade,(with a purple skirt, with rattles on the arm,) by letting it flutter into a sunken tree, in ten foot deep, thirty-six degree water. I soon felt that sluggish pull on the line, “like a pile of leaves or grass”, not until then, did I realize that I could catch bass year round on the right lures, with the right presentation, sound and color. It was well over six pounds, and was a different fight when she got close to the boat and saw the trolling motor. Since that time I have fished all over the United States, from New York to California, and found the right spinnerbait and the right technique produces big bass from all sorts of waters all year long. They key is to keep it in the strike zone, and most lures are made so that you can work them as slowly as you want to, while still keeping them in the zone.

“DIFFERENT TECHNIQUES”

I like to use the spinnerbait as a search tool, and kind of a depth finder, and bottom contour device also. What I do is check out the structure of the lake by bumping objects, and increasing my chance for a reaction strike right then. The spinnerbait will make a different sound bumping off different objects such as stumps, rocks, sand, and pea gravel.I also vary the speed often, and even shake the rod if necessary, trying to give the bass a different look, which is important in highly pressured waters. I work buzzbaits in a different manner also, which I believe is what accounts for some real lunkers that I might have otherwise missed. There are times when a spinnerbait is the most effective tool to use. When fishing the bait in heavy cover such as pads, I employ a technique that I now know is called fluttering by some anglers.

Basically what you do is to cast the spinnerbait out into the pads, and by moving your rod tip, and other parts of your body positioning, you maneuver the bait through the pads, and when it comes to an opening, stop it, and let it flutter down. Many strikes comes as a lure sinks.You should make a lot of casts to the areas where you really believe the bass are, or have seen them, as they can be irritated into striking if the bait is presented in enough variations and positions. Slow rolling can be extremely effective in deep water as it designed to imitate a crawfish on the bottom, or another type of bass forage. The trick to it is rolling it down the side of a sloping bank, a rock bar, a hump, or any underwater structure, and then slowly pumping it back to the boat. I employ the almost identical technique with a lipless crankbait with great success. There are also better types of spinnerbaits for different types of cover. C shaped baits tend to work better through heavy pads and grass, while a V shaped bait gets hung up more easily.

Riprap is another good area to slow roll spinnnerbaits. Sometimes there is debris mixed in with the rocks, and many times large bass are waiting to attack prey that come along, and are primes areas to slow-roll spinnerbaits. The spinnerbaits should be slow rolled over the rocks and such, and extra action is not really necessary. It should crawl over the bottom, and sometimes I give it a little twitch. All you have to do is raise the rod a slightly, lightly shake it, and then continue slowrolling it back to the boat.

“DEEP METHODS”

When the bass are really deep I employ a technique I call deep pulling; its like a yo-yo method but a little different. I let the bait flutter all the way down, and then let it sit, then I pull it hard and way up near the surface and do it again. I use real heavy baits with Colorado blades for this, usually in a chartreuse, or a chartreuse and white skirt when I fish in places that have dying shad in the winter, but anywhere else, I use black, or black/purple combinations. I always add a little Megastrike to the baits.

“TACKLE”

I like to use a 6 1/2 foot rod for this but sometimes I use a 7 foot rod, on different occasions. Many times situations come up when a 7 foot rod suits the situation better that a 6 or 6 1/2 foot rod for distance and control. Most of my rods I use for this technique are in a medium heavy action. I really like a Fiberglass rod for these baits, but there are many new rods that are very good for spinnerbaits and crankbaits, made by G.Loomis, St.Croix, Kistler,and Shimano. Sometimes on the smaller baits I use a spinning rod with Stren Super Braid,or Power Pro, but the rest of the time I use a baitcasting rod with a Shimano Chronarch, with fourteen to twenty pound P-Line or Bass Pro Shops line.

WHAT COLORS FOR WHAT BAIT

When I choose a color for a spinnerbait, a lot of factors come in to play. The first thing I do is pick a shad pattern, or whatever is the dominate species in the lake. I usually double up the skirts, to give them more bulk. I use blue and white, black and white, and chartreuse and white. Sometimes I use red, depending on the location. All of these colors give a good range of visibility under water.

In muddy water, I have always used the same colors, black and blue and red. The same goes for the nighttime. I like to use the forage in the lake if I can, such as rainbow trout or shad, and to make it appear injured to trigger that genetic response, but only if the water isn’t muddy. In muddy water I stick to black almost exclusively.

I like to use big spinnerbaits in the spring, when I’m in big fish waters, some right here in Delaware or Maryland, or others such as Florida, Arizona, Texas, and Mexico. When fishing strictly for big bass with spinnerbaits I add on a double or triple skirt for bulk and lift, and use really big blades. Terminator makes some big blades that I really like on our spinnerbaits. This year here in Delaware, I landed three bass in one day on big spinnerbaits, that went seven and eight pounds. Sometimes we even break off the tails of worms for trailers, and many times in the spring, I have caught some huge bass from ten inches of muddy water with a big spinnerbait with a trailer. The new Skeet Reese Redemption is another great spinnerbait and I use that with a Colorado blade in cold and/or muddy water.

I have had a great response from bass in the Delaware, Maryland, New Jersey, New York, and Pennsylvania areas, using a double golden shiner skirt. The bluegill and shad patterns top the list overall though. Sometimes reversing the skirts on the baits presents a different profile, and will also trigger hard to get strikes. The spinnerbait isn’t just a bait for beginners, although it is a great bait to break in a novice or child to the sport of bass fishing. But in the hands of an expert, it is a versatile year round bait, that can catch “HUGE” bass.

Calimesa

How to Build a Deck in a Bass Boat


Riverside County Live Bait Tank Pump Setup

Norco Fishing Bucket

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Norco, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Norco with your kids.

fishing live well tanks

Norco Live Bait Well

shrimp fishing bait

How Do Self-Bailing Boats Work?

David Morrissey as The Governor/AMC

For a moment there, it looked as though the antagonist of The Walking Dead's fourth season might be pneumonia. The camp had successfully integrated the Woodbury survivors and was finally beginning to make progress in their penitentiary refuge when questionable farming practices unleashed a minor contagion to complement the full-blown plague outside the prison walls. The infected could ride out the virus itself, the characters decided, if only they had enough antibiotics to keep the symptoms from suffocating them to death. So out go the camp heavyweights, scavenging for whatever pharmaceuticals they can find, unless Dr. Bob stumbles upon a bottle of Dewers first, in which case… yawn.

Not that I was at all nostalgic for season three. The Woodbury plot started out promising, but dragged on entirely too long, and without the sinew needed to hold it together. Yet, what the show needed least of all was more fetch plots: characters running to point A, only to find that they can’t get what they came for until they’ve sidetracked to point B, then back to A, and so on. That was a mainstay of season 1, and I had no enthusiasm for a reprise.

Leading up to this year’s mid-season finale, though, the show wrapped up the virus plot with merciful dispatch and followed with a two-episode detour that counter-intuitively reasserted a potential for greatness with which the show has long flirted, but rarely attained.

Two of the aforementioned heavyweights, plus Dr. Bob.

That may seem an odd thing to say. After all, The Walking Dead is AMC’s most popular show. This season’s premiere drew in more than 16 million viewers, more than the combined peak ratings for Mad Men and Breaking Bad. Like those prestige shows, The Walking Dead is marked by fine acting, a mostly consistent tone, and benchmark production values that rival its premium cable competition. It even outdoes most recent big budget horror movies with its inventive treatment of the titular Walkers’ grossly pliable bodies, for which the show has won its only two Emmys.

What makes The Walking Dead perhaps the most consistently frustrating show on prime time are the nuts and bolts of its storytelling. The plots—like season 2’s doomed search for Sophia—work best when you take the long view, but the narrative beats from which they’re composed are often clunky and disjointed. Getting from plot-point to plot-point often requires characters to behave erratically. Psychological change happens suddenly, with precious little development.

That, in part, explains why the post-episode discussions in The Talking Dead are so critical to the show’s success. Buoyed up by Chris Hardwick’s dauntless enthusiasm for all things nerd, they encourage viewers to retell the story to themselves. That lets them dwell on the high points, suture together the connective tissue of the overarching plots, and fill in the show’s psychological ambiguities to their own satisfaction.

If all that fails to sell the shifts the writers need in order to progress the plot, there’s always a final resort in the extremity of the situation. If a character’s behavior doesn’t quite square with how we’ve understood them up to that point, well, the apocalypse makes everyone a tad unpredictable, now doesn’t it?

Or does it? It’s so far outside the bounds of common experience that we don’t really know. Every time the story relies on apocalyptic stress to change a character, it makes it a little harder relate. That might not have been a problem except that so much of The Walking Dead is about how people relate (or don’t relate) to one another. Its central conceit is not so much the bodies milling about the landscape, as the premise that, stripped of the civilizing crutches of modernity, we’re forced to struggle against ourselves if we want to remain connected to people. That struggle grows a little harder to believe every time the audience can’t quite make sense of a sudden change of mind or left-field resolution.

Which is precisely why the two most recent episodes—“Live Bait” and, to a lesser extent, “Dead Weight”—took me so much by surprise. By the 2nd half of season 3, I had begun to find the Governor more tiresome than compelling. It’s easy enough to imagine how a leader faced with a constant state of emergency would develop a markedly draconian bent, but the more grotesque turns in his character never really added up.

How, for example, were we to square his disdain for the “Biters” with the literally closeted devotion he showed to his reanimated daughter? Wind-down periods with a glass of Scotch and a wall of Biter heads suggested that he was simply deranged: a plausible explanation, but one that turned him into a mustache-twirling caricature, rather than a three-dimensional foil. There’s nothing inherently wrong with a two-dimensional character—the novelist E.M. Forester argued that a well-constructed plot could hardly move without them—but the point is to let them do their job, then usher them back out again. The Governor never quite managed a third dimension, yet the show stubbornly refused to kill him.

Might be time for a change.

He first resurfaced at the end of episode 5 (“Internment”), the camera pulling back on a peaceful father-son moment to show him watching from the woods. I was nonplussed, but the next episode betrayed the expectation set by that menacing reappearance. Right away, it set itself to the task of stripping him down to nothing. By the title sequence, he was ready to start working on that third dimension.

Broadly, “Live Bait” is structured as though its central plot were about the Governor were building a new family, but it’s more effective as the story of a man rebuilding himself. Its very much a bottle episode, honing in on a single character and a self-contained plot to the exclusion of nearly every other plotline the show has followed up to this point. That narrowness of focus is very much to its advantage. Its new setting (an apartment building occupied by a family that’s sheltered itself to the point of obliviousness) allows the episode to recapitulate the essential horror of the situation. In one scene, the Governor (now calling himself Brian) searches an apartment for a backgammon set, only to discover its previous tenant in the bathtub, still biting after a badly botched suicide attempt. Barely a threat at all, the ghoul invites us to reconnect the Biters to people as they were before the world fell apart and their mundane lives were shattered.

More importantly, though, the episode makes Brian relatable. In rapid order, he goes from being the impenetrable villain of season 3, to a man reawakening to himself after (literal) months and (figurative) years of wandering. Asked what he’s been up to since the Biter outbreak, he says, “Surviving,” as though Woodbury were just another struggle to get to where he is now. By giving a false name, he’s disavowing an identity that was—let’s be honest—gratuitous.

Remarkably, that transition works, not least of all, perhaps, because what we’ve seen of his past has, for us, the same nightmare quality that it’s supposed to have for him. It works, moreover, as its own story, and I found myself more involved than in any plotline the show has offered so far. The story of a tyrant becoming a man, of a monster becoming relatable: it’s a good story. Good enough, in fact, that we could leave the other camp to their prison base and follow Brian for a while; maybe even indefinitely.

For better or worse, though, the show is anchored to Rick Grimes’ uncertain band of survivors, and “Dead Weight” began the work of dovetailing the two plots back together. That episode begins with the Governor’s former lieutenant Martinez pulling Brian and his surrogate daughter, Meghan, from one of the mass grave-style pits they used to trap Biters outside Woodbury. That image prefigures the resurrection of the Governor identity, but for a while, at least, you could almost believe that the episode was about Brian overcoming the pull of his draconian past.

That’s the plot suggested by another pre-title image, Brian teaching Meghan chess while he hangs laundry on a line strung between a camper and a tank. The tension that presents—between the makeshift home life on one hand, and the protectiveness run amok on the other—is far more resonant that the Governor’s rebirth from the Biter pit. In terms of plot, though, its real significance was not the internal struggle—by the end of the episode, that would already largely be decided. Rather, as preview scenes from the mid-season finale suggest, the real point was the introduction of that tank, which the reborn Governor can now use to threaten the Grimes camp.

Thus begins the rapid unravelling of everything “Live Bait” achieved. The Governor may have updated his motive, but the months of wandering haven’t taught him any new methods. Martinez wants to “share the crown,” but that’s not how dictatorships work. Nor is he the strongest arm in the camp anymore, what with a tank driver among their ranks. Competition is eliminated; new alliances are formed. The Governor even finds time to start a new aquarium at the bottom of the lake. Unless you’re willing to content yourself with a deranged villain, the steps that get us to this point don’t really parse, but that doesn’t matter so long as the plot keeps rolling.

Once again, the show is playing chess with the characters’ personalities to orchestrate a dramatic confrontation. That likely won’t hurt its ratings: there are, after all, too many appealing elements to let a false start like that dissuade viewers. For almost two full episodes, though, The Walking Dead revealed the character-driven kind of show it might have been, and it was good.

Norco

Check Out A Few Of These Great Fishing Tips!


Riverside County Live Bait Tank Pump Setup