San Bernardino Saltwater Live Bait Tanks

How Weather Patterns Can Affect Fishing On The Water

Fishing is a great way to spend per day. To become a great fisherman may seem like a difficult task, however, like many skills this simple requires some practice and basic knowledge. There are numerous great spots to go fishing through out the San Bernardino area, and in nearby mountains. In this short article, we provide several tips to be of assistance in becoming a better fisherman. The following article will show you the best way to increase your haul in such a way that you just never imagined.

Should you use shad and bottom fishing, cut the tail away from the shad before baiting your hook. This prevents the bait from tangling as a result of spin because it goes further in to the water. Moreover, the scent of your cut tail can help to attract fish on it.

Casting on the shore of any river or lake around San Bernardino can often net the greatest results. Fish who rely on insects for food generally discover them in abundance near to the shore, to have more bites by casting your lure during these areas. However, if you cast close to the shoreline, you must take care not to tangle your line in weeds or debris.

Choose an inverse color for your personal bait in the color of water. Many fisherman prefer to use live bait kept in a live bait carrier, because fresh bait will normally yield better quality fishing. If the water is murky, use light colored bait that it is visible on the fish. On the other hand, if the water is obvious, ensure that you use darker colored bait.

When fishing, sit in the location for at least half an hour before stopping. Oftentimes, you must supply the scent of your bait a chance to travel and you must provide the fish in the water time and energy to locate your line. In the event you don’t wait a minimum of half an hour with this to occur, you could possibly neglect some very nice catches.

Always pack extra supplies of food and water, especially on hot days. Sitting in the sun for several hours at the same time can drain your whole body, so it is essential that you continue it replenished to maintain your power levels. Bring snacks plus some meals, depending on how long you plan to keep out.

aerated minnow bucket

Which means you made our minds up you would like to take up fishing like a hobby. If you are just starting with fishing, you should maintain your equipment pretty simple. It all depends on what you are actually form of fish you are fishing for with regards to equipment. Most beginners begin with lightweight tackle. The main beginner’s equipment will include a rod and reel, 12 lb. test line, small and medium sized hooks (for live bait fishing), several bobbers, a couple of artificial lures, some sinkers, a pair of pliers, a net, along with a pocket knife. Don’t forget to examine your state’s laws to discover should you need a fishing license for the body of water in which you anticipate fishing.

Make sure to use correct casting technique while you are fly fishing. You must have approximately 20 feet of line out before you if you cast. Stay away from jerky motions, and cast a straight line. Above all, try and relax which means that your tense muscles will not likely ruin your casting.

Make sure to match the size of your bait to the size of the fish you are trying to catch. The logic behind this really is simple — small fish pursue small bait, while larger fish will chase larger kinds of bait. Bluegill and Crappie make good bait for larger fish including Muskie and Pike.

Fishing is really a sport with universal appeal. Fishing is the best way to relax and enjoy yourself, in addition to relieving difficulties with anxiety or stress. Successful fishing is often a combination of techniques, patience and luck. If you are using the recommendation you possess read, you might be on the right track to becoming a skilled fisherman.

The Best Lures to Use In Fishing

bait for fishing

DIY Nuc Plans

Beekeeping is a very rewarding hobby, just think about all that delicious, golden honey flowing, mmm! Those of us that have been keeping bees for any time knows that you eventually need to start splitting your hives to prevent them from swarming. Another advantage of splitting is to make a new hive for another beginner to start their own apiary. Perhaps you are an adventurous type and are interested in rearing your own queens.

What ever your motivation is for slitting your hives, you will need the proper equipment to do so. One of the most important pieces of equipment you will need is the box, and that is where your nucs come in very handy. A nuc is a smaller bee box that makes it easier for a fledgling colony of bees to get a strong start. The problem is that they aren't exactly cheap, especially if you are buying several at a time.

This lens is dedicated to teaching you how to make your own nucs!

Step 1: Cutting Your Wood

Making the puzzle pieces

The first step is the most time consuming, especially if you have never done this before. Once you have made a nuc or two, it starts to become a breeze. If you study the picture carefully, it has every piece laid out on a 2' x 4' piece of plywood. Personally, I use 3/4 inch plywood from Lowe's or Home Depot. I tried 1/2 but it didn't seem to hold up on the joints nearly as well. Spend a few extra dollars for the good stuff, your bees will thank you.

Let me list out the dimensions of the pieces, just in case you can't quite read them in the picture. The parts are from left to right:

2 Front Walls - 7 1/2 x 9 1/2 (you will actually get three from the cut outs)

2 Front Tops - 9 x 2 1/2 (these become the handles of the box)

2 Side Walls - 10 1/2 x 19 3/4

1 Top - 9 x 22 3/4

1 Bottom - 9 x 24 (can be shorter if you like smaller landing areas for your bees)

Once you have cut the pieces you are ready to start your assembly. Yes, that's it, no more cutting or routing or anything else!

How to start beekeeping

Here are several books that will teach you everything you need to know about beekeeping, but don't forget, join a local beekeepers guild!

Step 2: Adding Sides

It starts looking like a box

There are several styles of putting the box together, but it really comes down to nails or screws. Nails are a bit easier to use, but the screws will last much longer. Personally, I've chosen to put a bit more effort into it and use the screws.

One word of caution if you do choose to use screws. Due to the fact that you are driving them into the end and side of a laminated piece of wood, it is strongly advised to drill a pilot hole before you actually drive your screws. This will keep the wood from cracking. It is also advisable to drive the screws or nails as straight as you possibly can so you won't have sharp objects poking out ready to impale you. Oddly enough, this tip is more for you than your bees. You will never hear your bees mumbling about the hive about pointy objects that they stubbed their toes on, but you will certainly hear about the beekeeper that ripped his jacket and let a good number of bees sneak in and sting him!

This step would be a tad easier if you had a third arm (as many tasks would) but it really isn't that bad. All you need to do at this point is to attach the sides to the OUTSIDE edges of the front and back. It is important to attach it to the outside or your nuc won't be wide enough to accommodate the five frames you need. I usually use two screws at each joint, you may want to add a third but watch out that you don't apply too much pressure and split the wood.

Step 3: Adding Handles

The handles double as the frame ledge too!

The part I love most about this design is that the handles actually double as the ledge that the frames rest on. Many other designs require that you use routers or other fancy techniques, but this is much easier.

Take the smallest pieces of the cutout and place it on the front flush with the top of the sides. It will overlap slightly with the front panel and the be flush with the outside of the side walls. Screw it in place with one screw on each side. Again, you may want to add an extra screw to give you a warm and fuzzy feeling, but one usually does the trick.

Flip the box over and repeat for the back handle and ledge.

Step 4: Attaching the bottom board

Even bees need a floor

Technically speaking, this step is optional. Sometimes you want to make a second story to a nuc that you already have going. In that case you wouldn't need a bottom board at all. It will simply set on top of the current nuc just like a normal size hive has many boxes stacked on top of each other.

If you do choose to add the bottom, flip the box over and lay the bottom board on it. You need to decide which end will be the front. The extra length of the bottom board will hang over on the front end. This will eventually become the landing pad for your bees. Once again, screw this onto the box, usually one screw on the end and two on each side.

I used to screw on the front until I started ruining my drill bits in the next step. You see, if you put the screw through the center of the front then when you drill the entrance hole you will drill right through your screw. Not a pretty site seeing your bits all chewed up. With a bit of experimentation, I discovered that it doesn't really help much to even have a screw on the front.

Step 5: Drilling holes

The bees need a door right?

The size and location of your entrance does actually matter. First, if you ask 5 different beekeepers what the right size of entrance holes is you will probably get 6 answers. I make my entrances 3/8 of an inch for three reasons: 1) it gives them plenty of room to come and go, 2) it is small enough to defend against pests and robber bees, and 3) most rodents have trouble getting through that size of a hole when seeking shelter.

As far as the location of the front entrance, be very careful when deciding where you place it! I have heard of people leaving up to an inch between the bottom board and the hole. This plan has a solid bottom board which does not give anywhere for water drainage. If you aren't careful, you could end up with an inch of bee soup in the bottom of your hive instead of honey.

I put my front entrance as close to the bottom board as possible. This allows for adequate drainage. The rear entrance is typically an inch or so under the rear handle. I leave this room just in case I need to move the box and a handful of bees have decided to hang out on the back porch. It is important that you do drill both openings, it will provide much better ventilation for the hive.

Step 6: Making the lid

The last step!

The lid is the easiest part of the entire job. Simply take the last remaining piece and screw two pieces of scrap, that you have from the cutting step, to the ends of the top piece and **poof** you have a lid. The only mistake that I have ever made in this step was not doing a test fitting before I screwed the scraps on. It is a good idea just as a sanity check to make sure that the lid will actually fit on top before you screw them down.

Bonus Step: Adding Bees!

Here comes the fun!

While it is rewarding to be able to make your own nuc boxes, it is fairly boring to watch an empty box. Go out and find a swarm or get in touch with your local beekeeping guild so you will have some little critters that call your box a home. They will love your newest creation, I promise!

What makes good nuc boxes?

When you are looking at buying or building a nuc box you should consider a few things. The box should fit snugly with the lid. The last thing you want is to have a gust of wind blow the roof off of your honey bees' house. The lid should also fit flush with the rest of the hive. If there is any bowing of the lid it can lend itself to not keeping crucial heat in during winter months. The entrance should not be too large. It doesn't take much of a space for the workers to come and go, so keep it small so rodents can't get in. It also makes it easier for the bees to protect their hive.

DIY Nuc Box

Why build your own?

The answer is quite simple, it is much cheaper. The nucs that I used to buy, not counting shipping, was about $25. The ones that I make now are $3.50. Holy savings batman!

Beekeeping can become a very expensive hobby. Many people say that there is no money in keeping bees but that isn't really true. The people that shell out tons of cash are the ones that buy overpriced equipment. If you are frugal with this hobby, it will definitely pay for itself many times over.

Nuc Box as a Bait Hive

Catching wild swarms of bees

If you are looking to expand the number of bee hives that you have, a nuc box is one of the best tools you can use. Select a wooded area that is fairly easy to get access to to place your swarm box. Put a piece of old comb in the box with a few frames and strap the box about 10 feet off the ground in a tree. A swarm is more likely to pick this box than other places because it smells like an old hive was there because of the comb and because it is up off the ground.

This method can bring you a few extra hives a year if done correctly. Hey, who doesn't like free bees!

I'd love to hear from you and your experiences making your nucs. Do you have any other plans that you have had luck with? Let me know and I will feature it for you!


Lucerne Valley Baitwells

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Lucerne Valley, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Lucerne Valley with your kids.

bait for fishing

Lucerne Valley Live Bait Well

offshore bait tanks

Fishing Rods Review

Screwlock Style Shakey Head

Dirty Jigs Stand Up Finesse Head 5/0 4pk

Finesse fishing has become very popular, and more and more anglers are finding new applications for the technique. The trend of “finesse” fishing with 5" and bigger worms along with craw style baits has gained a lot of attention recently. Dirty Jigs considered this when designing the new Dirty Jig Stand Up Finesse Head. Featuring a larger 5/0 Mustad Ultra Point Jig Hook with a 60-degree flat eye — whether you want to rig a Hag’s Tornado, a Power Team Lures 5" Finicky Tickler or 3.5" Craw D’oeuvre, even all the way up to the Power Team Lures 10" Ribbon Hinge Worm, the Dirty Jigs Stand Up Finesse Head has you covered. Available in several colors, the Dirty Jigs Standup 5/0 Finesse Head also features a recessed line tie to protect your knot and a convenient cork screw keeper.

Traditional Style Shakey Head

Bite Me Finesse Shakey Jig 4pk

Highly effective around pressured or spooked fish, the Bite Me Finesse Shakey Jig provides a scaled-down shakey head presentation that excels on those extra-tough days. Molded around a 2/0 Gamakatsu sproat hook, the Bite Me Finesse Shakey Jig features a short shank that better suits smaller worms, craws, and creature baits. 
 
 To keep those mini plastics locked in place, the Bite Me Finesse Shakey Jig is equipped with a longer-than-normal baitkeeper barb, which also eliminates the need for any messy glues. If the hook keeper is too long, simply trim it back with a quick snip of the cutters. A must-have for targeting finicky bass, the Bite Me Finesse Shakey Jig delivers bite-sized performance that puts fish in the boat when other techniques fall short.

Gamakatsu Ball Head

Gamakatsu Round Jig Head 5pk

Ball heads are useful for a variety of soft plastic baits and these heads feature the ultra-sharp Gamakatsu hooks for positive hookups. Everyone knows about the legendary Gamakatsu hooks and this level of sharpness is exactly what you need especially when fishing with light lines and on deep structure. These heads offer the angler a choice of hook and weight combinations so you can get the perfect Gamakatsu Ball Head for your situation. The double keeper collar means the plastic will stay where it belongs even when you’re pulling it through rough structure and gnarly cover. Use the Ball Head with plastic worms either open hooked or ‘Tex-sposed’, for swimming a grub, for a finesse presentation of a creature bait, or for tying your own jigs. The Gamakatsu Ball Head will give good results every time.

These are authentic product from Gamakatsu, not just someone using Gamakatsu hooks in their heads.

Football Head W/ Weedguard

BOSS Football Jig Head 4pk

The BOSS Football Jigs Head features a custom paint job, large skirt cone and built in plastics keeper. The BOSS Football Jig Head is backed with a 4/0 Mustad Ultra Point Hook in the 1/2oz size and a 5/0 in the 3/4oz. A top grade weedguard is secured, remember not all jig weedguards are the same. All BOSS jig heads feature an unmatched custom 5 step paint job.

For more tips and tricks on rigging skirts check out this video of Gary Klein discussing BOSS Skirting

If you are looking for any skirt material to customize your jigs, don’t forget to check out Skirts Unlimited Skirting Material.

Football Head Plain Style

Yamamoto Football Jig Head Gamakatsu 4/0

Football jig heads are the perfect complement to spider jigs and these Yamamoto Football Heads are a perfect match for the Yamamoto Hula Grubs. The Yamamoto Football Jig Heads come with two different hook choices, a heavier wire, longer shank Gamakatsu hook and a lighter wire, shorter shank Owner hook. Although the Gamakatsu hook is listed as 4/0 and the Owner hook is 5/0 due to the differences in measuring hook size between the two companies, both these hooks have the same gap. In other words, they both have the same distance between the point and the shank. The plastic spider jigs stay firmly in place with ring type bait keepers so you won’t pull the plastic down even when dragging it over a rough bottom.

Darthead Painted

Revenge Darter Hedz 3pk

The Revenge Darter Headz feature exceptionally realistic detailing on their life-like heads, complete with 3D eyes for added authenticity. A durable chip resistant coating uses color-shifting metallic pigments to imitate real bait and provide long lasting durability. Available in a multitude of color schemes to match your local forage and favorite soft plastic bait. The Mustad Ultra-Point Black Nickel Round Bend Hooks supply rock solid hooksets so more bass end up in the boat.

Darthead Unpainted

Owner Ultrahead Darter Heads 5pk

Putting a worm on a darter head can be a great fish-catching rig, especially for finesse style fishing or when the fish won’t bite a standard Texas-rig. The darter head will hop and bounce along the bottom with fish attracting undulations in the worm and can be quickly and efficiently worked along any bottom that is relatively clear of sticks or grass. With the Owner Ultrahead Darter Heads you have the advantage of a premium fish catching and fish holding hook on the end of your rig ensuring you the confidence of getting the fish into the boat when it bites. If you like using a darter head rig you’ll love these rigs.

Lucerne Valley

Best Ways To Go Fishing With Kids?


San Bernardino Saltwater Live Bait Tanks

Adelanto Livewells

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Adelanto, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Adelanto with your kids.

bait wells for sale

Adelanto Live Bait Well

minnow cooler

One Man’s Favorite Bait

Photo: Joe Milmoe, USFWS

With over 40 million people fishing each year, it can be a great way to spend time outside with family and friends. Whether you’re revisiting something you haven’t done in years or you’re wanting to try it for the first time, don’t feel overwhelmed! These basics will get you started.

Checklist for Fishing in Fresh Water:

  • A state fishing license (depending on your age)
  • A fishing rod and reel
  • 4- to 12-pound-test monofilament fishing line
  • A package of fishing weights
  • Fish hooks (Number 6–10 size)
  • A plastic or cork bobber
  • A selection of live bait or fishing lures 
    You’ll find everything you need at a fishing tackle or sporting goods store.
Learn more about fish species you may see!

The Improved Clinch Knot

Pass line through the hook eye and, with the tag end, make 5 turns around the standing line. Insert the loose end of the line between the eye and the first loop formed. Bring the tag end through the large second loop formed. Wet the line and tighten the knot slowly.

Hook, Line, and Sinker

Now you are ready to set up your rod with hook, line, and sinker. Tie on a fish hook. Attach 1 or 2 sinkers, 6 to 12 inches above the hook. This weight will keep your bait or lure down in the water and will help swing it away from shore. A bobber lets you know when fish are biting, because it moves up and down in the water as fish nibble at the bait. Most bobbers attach to fishing line with a spring clip and move up and down the line easily, depending on how deep you want to fish the bait.

What Tackle Can I use?

With spin casting or spinning tackle, you can put the bait or lure where the fish are. You can cast greater distances with more accuracy, work lures effectively, fish in deeper water, and handle larger fish more easily with this tackle.

Spin-casting outfits use a rod with a pistol-like grip and a reel that’s mounted on the top of the rod’s handle. Line is released using a push button on the reel. This is the easier rod and reel for beginners.

How Can I Learn to Cast?

Once you’ve selected a spin-casting or spinning outfit, use the Improved Clinch Knot demonstrated above to tie on an inexpensive rubber covered weight called a casting plug. Next, find an open area away from other people where you can practice casting.

What about Accessories?

A tackle box will store a variety of lures, hooks, snap swivels, weights, and tools like long-nose pliers and other gear you can use. You might also need a live bait container (such as a minnow bucket or a worm box), a stringer or an ice chest to keep your catch fresh, a landing net, and a first-aid kit for minor emergencies.

Learn more about fish species you may see!

Catch and Release

Fish should never be wasted. If you catch a fish that is under the legal or minimum size or that you do not want to keep, release it quickly. If possible, keep the fish in the water and handle it carefully. When it begins to wiggle and can swim normally, let it go.

Learn more about fish species you may see!

Safety First!

  • Fish with a companion who can offer help in an emergency
  • Be careful when handling sharp hooks
  • Don’t cast near other people, and always look around before making a cast.
  • Wear a Coast Guard-approved personal flotation device or life vest when wading or in a boat.

Practice Conservation

A good angler respects our natural resources and wants to conserve them for others to enjoy. Always carry out what you brought in and never leave behind plastic containers or packaging. Fishing line is very dangerous to birds and other wildlife, so pick up and recycle.

Go Fish!

There are many places to fish and they’re likely closer than you think. Including many national wildlife refuges!

Look for a weedy or rocky area where the water is several feet deep. Look for areas where the bottom changes in some way — from sand to gravel or from sand to mud. Stay quiet and avoid disturbing the water or you may scare fish away. Next, bait your hook. Swing the bait as far from shore as you can and watch the bobber. When a fish bites, raise the tip of the rod quickly to set the hook and reel your catch in.

>> Learn more about fish species you may see!

This was adapted from the “fishing is fun for everyone” brochure.

Adelanto

The Conveniences Of An Angling Overview


San Bernardino Saltwater Live Bait Tanks

Montclair How To Make A Livewell For Fish

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Montclair, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Montclair with your kids.

floating bait bucket

Montclair Live Bait Well

live bait pump

How to Build a Box Trap

Being the co-CEO and trustee of Otto Bremer Trust, Daniel Reardon is tasked with the management and maintenance of every aspect of the foundation. This includes overseeing Otto Bremer Trust’s responsibilities as a Bank Holding Company, as well as fostering its relationship with regulators and investors. When he is not working, Daniel Reardon enjoys going fishing.

The bait-casting reel is specifically designed for the more seasoned angler. Ideal for heavy lures and bait, it is the tackle of choice for catching larger types of fish. One advantage of the bait-casting reel is its versatility allowing for more accurate measurements when casting a specific distance. The only downside to bait-casting reels is that they can lead to what anglers call a bird’s nest, technically known as backlash.

Backlash occurs when the lure slows down as it descends towards the water, but the spool continues to spin faster. Once this happens, the angler has to spend time untangling the line, leaving them less time to actually catch any fish. Preventing backlashes, however, is easy with these tips:

1. Use heavier lures. When a lure is too light for the force of the caster, the spool will not receive any resistance, causing it to spin faster and end up in a bird’s nest.

2. Choose a high-quality fishing line. For example, using a braided line will cause tighter backlashes that are harder to detangle. Fluorocarbon lines end up backlashing more than monofilaments; however, monofilaments are better suited for practice than for actually catching heavier fish.

3. Avoid casting lines into the wind. The force of the wind may slow down the lure, which causes the spool to spin too quickly before the line drops into the water.

4. Customize the brake setting of the fishing rod. Modern rods have adjustable brakes to prevent backlashes. Beginners should start at the highest setting until they feel comfortable enough to cast their line greater distances.

Montclair

Catching Big Winter Bass


San Bernardino Saltwater Live Bait Tanks

Apple Valley Fiberglass Livewell Tank

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Apple Valley, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Apple Valley with your kids.

bait well

Apple Valley Live Bait Well

bait caster reels

The Conveniences Of An Angling Overview

The evolution of fishing gear and accessories along with the development of the bass fishing industry brought about the development of various lures specifically used for different fish species.

There are many types or class of lures and they all depend on what type of fish works for them. Much only work for specific types but some cover a wide range of species of fish.

Below are some of the typical lures used for fishing.

Light Standard Casting Lures

For Standard casting lures, they are mostly able to attract a wide range of fish varieties from albacore, bluefish, Bonita, oho and crappies. These lures are also excellent for certain species of bass fish and work best when retrieved from water at low to medium speed. They pass through water with undetectably synthetic material.

Their sizes are excellent for lightweight fish and a host of freshwater species. They range from 1/16 oz. to 3 oz.

The hand painted eye is enticing enough to allow schooling of fish. This feature allows for more chances of trapping one of the target fish in the water.

Heavy Standard Casting Lures

Heavy Standard Casting Lures are excellent for quite heavy fish specifically, walleye and bass. While the lightweight lures are used in most circumstances, it was shown that heavy counterparts provide more reliable fishing output.

Moreover, the heavy standard lures are able to catch fish than diamond and light standard casting lures.

Long Casting/Jigging Lures

Perhaps the most popular among the fishing lures are the long, tapered jigging lures. They are perhaps the most commonly used fishing lures among the fishermen in Florida, Mississippi, and Louisiana.

Just recently, it was found out that the long casting lures work best for catching trout and pike. They were also found to effectively catch stripers and bluefish. They can catch tuna and walleye in a breeze!

Unlike heavy standard lures, this gear won’t produce good fish-catch output up to 180–200 ft under water but be sure to effectively match your lure color, bait, and related accessories to maximize performance.

Deadly Diamond Lures

These lures are one of the smallest with sizes ranging from 1/8 to 1oz. They can seamlessly attract attention among fish and could form a school of fish in a minute!

The reason is it lies on its structural surface formation and cut. The top handle is cut like a diamond and causes the reflection of light striking on its surface. The diamond lures are best for catching bass fish varieties, crappie and stripers although they work on a small range of fish species

Apple Valley

Avoiding Backlash When Using Bait-Casting Reels


San Bernardino Saltwater Live Bait Tanks

Needles Live Bait Tank

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Needles, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Needles with your kids.

bait cooler

Needles Live Bait Well

live shad bait

The Best Lures to Use In Fishing

How Weather Patterns Affect Every Day On The Water

Fishing is a fantastic strategy to spend per day. To become great fisherman may look like difficult, home & family hallmark however it isn’t very difficult. This short article provides several tips to be of assistance in becoming a better fisherman. The following article will show you the best way to increase your haul in such a way that you just never imagined.

Should you use shad and bottom fishing, cut the tail away from the shad before baiting your hook. This prevents the bait from tangling as a result of spin because it goes further in to the water. Moreover, the scent of your cut tail can help to attract fish on it.

Casting on the shore of any river or lake often nets the greatest results. Fish who rely on insects for food generally discover them in abundance near to the shore, to have more bites by casting your lure during these areas. However, if you cast close to the shoreline, you must take care not to tangle your line in weeds or debris.

Choose an inverse color for your personal bait in the colour of water. If the water is murky, use light colored bait that it is visible on the fish. On the other hand, if the water is obvious, ensure that you use darker colored bait.

In case you are new to fishing, it can help to understand the skill of patience. Fishing will not be a speedy paced sport, and you will sit for hours before you even get yourself a nibble. Learn to take pleasure in the peaceful time that you simply spend having a rod within your hand and the action of fishing will become a satisfying one.

When fishing, sit in the location for at least half an hour before stopping. Oftentimes, you must supply the scent of your bait a chance to travel and you must provide the fish in the water time and energy to locate your line. In the event you don’t wait a minimum of half an hour with this to occur, you could possibly neglect some very nice catches.

You should wear sunscreen every time you decide to go fishing, even though the day is not really very warm outside. Many times direct sunlight beams down hard over water and you want to ensure that you may not get yourself a pretty bad sunburn while you are on the market.

Always pack extra supplies of food and water, especially on hot days. Sitting in the sun for several hours at the same time can drain your whole body, so it is essential that you continue it replenished to maintain your power levels. Bring snacks plus some meals, depending on how long you plan to keep out.

Which means you made our minds up you would like to take up fishing like a hobby. If you are just starting with fishing, you should maintain your equipment pretty simple. It all depends on what you are actually form of fish you are fishing for with regards to equipment. Most beginners begin with lightweight tackle. The main beginner’s equipment will include a rod and reel, 12 lb. test line, small and medium sized hooks (for live bait fishing), several bobbers, a couple of artificial lures, some sinkers, a pair of pliers, a net, along with a pocket knife. Don’t forget to examine your state’s laws to discover should you need a fishing license for the body of water in which you anticipate fishing.

Make sure to use correct casting technique while you are flyfishing. You must have approximately 20 feet of line out before you if you cast. Stay away from jerky motions, and cast a straight line. Above all, try and relax which means that your tense muscles will not likely ruin your casting.

While fishing you always want to ensure that the hooks are actually sharp. A dull hook will make the most flawless fishing technique turn fruitless. You need to bring replacement hooks with you whenever you go fishing, or learn to sharpen them around the fly. When a fisherman wants to catch a great deal of fish, he or she wants a sharp hook.

Make sure to match the size of your bait to the size of the fish you are trying to catch. The logic behind this really is simple — small fish pursue small bait, while larger fish will chase larger kinds of bait. Bluegill and Crappie make good bait for larger fish including Muskie and Pike.

When you find yourself fishing in clear water, there is no requirement for large or flashy lures. In reality, the greater subtle your bait is definitely the better since fish can already look at it clearly. Consider reducing not just the dimensions of your bait and also of your respective line and sinker to acquire a more natural look.

Fishing is really a sport with universal appeal. Fishing is the best way to relax and enjoy yourself, in addition to relieving difficulties with anxiety or stress. Successful fishing is often a combination of techniques, patience and luck. If you are using the recommendation you possess read, you might be on the right track to becoming a skilled fisherman.

Needles

Great Bass Fishing Tips


San Bernardino Saltwater Live Bait Tanks

Barstow Baitwells

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Barstow, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Barstow with your kids.

bait well

Barstow Live Bait Well

bait tanks for boats

Catching Big Winter Bass

Screwlock Style Shakey Head

Dirty Jigs Stand Up Finesse Head 5/0 4pk

Finesse fishing has become very popular, and more and more anglers are finding new applications for the technique. The trend of “finesse” fishing with 5" and bigger worms along with craw style baits has gained a lot of attention recently. Dirty Jigs considered this when designing the new Dirty Jig Stand Up Finesse Head. Featuring a larger 5/0 Mustad Ultra Point Jig Hook with a 60-degree flat eye — whether you want to rig a Hag’s Tornado, a Power Team Lures 5" Finicky Tickler or 3.5" Craw D’oeuvre, even all the way up to the Power Team Lures 10" Ribbon Hinge Worm, the Dirty Jigs Stand Up Finesse Head has you covered. Available in several colors, the Dirty Jigs Standup 5/0 Finesse Head also features a recessed line tie to protect your knot and a convenient cork screw keeper.

Traditional Style Shakey Head

Bite Me Finesse Shakey Jig 4pk

Highly effective around pressured or spooked fish, the Bite Me Finesse Shakey Jig provides a scaled-down shakey head presentation that excels on those extra-tough days. Molded around a 2/0 Gamakatsu sproat hook, the Bite Me Finesse Shakey Jig features a short shank that better suits smaller worms, craws, and creature baits. 
 
 To keep those mini plastics locked in place, the Bite Me Finesse Shakey Jig is equipped with a longer-than-normal baitkeeper barb, which also eliminates the need for any messy glues. If the hook keeper is too long, simply trim it back with a quick snip of the cutters. A must-have for targeting finicky bass, the Bite Me Finesse Shakey Jig delivers bite-sized performance that puts fish in the boat when other techniques fall short.

Gamakatsu Ball Head

Gamakatsu Round Jig Head 5pk

Ball heads are useful for a variety of soft plastic baits and these heads feature the ultra-sharp Gamakatsu hooks for positive hookups. Everyone knows about the legendary Gamakatsu hooks and this level of sharpness is exactly what you need especially when fishing with light lines and on deep structure. These heads offer the angler a choice of hook and weight combinations so you can get the perfect Gamakatsu Ball Head for your situation. The double keeper collar means the plastic will stay where it belongs even when you’re pulling it through rough structure and gnarly cover. Use the Ball Head with plastic worms either open hooked or ‘Tex-sposed’, for swimming a grub, for a finesse presentation of a creature bait, or for tying your own jigs. The Gamakatsu Ball Head will give good results every time.

These are authentic product from Gamakatsu, not just someone using Gamakatsu hooks in their heads.

Football Head W/ Weedguard

BOSS Football Jig Head 4pk

The BOSS Football Jigs Head features a custom paint job, large skirt cone and built in plastics keeper. The BOSS Football Jig Head is backed with a 4/0 Mustad Ultra Point Hook in the 1/2oz size and a 5/0 in the 3/4oz. A top grade weedguard is secured, remember not all jig weedguards are the same. All BOSS jig heads feature an unmatched custom 5 step paint job.

For more tips and tricks on rigging skirts check out this video of Gary Klein discussing BOSS Skirting

If you are looking for any skirt material to customize your jigs, don’t forget to check out Skirts Unlimited Skirting Material.

Football Head Plain Style

Yamamoto Football Jig Head Gamakatsu 4/0

Football jig heads are the perfect complement to spider jigs and these Yamamoto Football Heads are a perfect match for the Yamamoto Hula Grubs. The Yamamoto Football Jig Heads come with two different hook choices, a heavier wire, longer shank Gamakatsu hook and a lighter wire, shorter shank Owner hook. Although the Gamakatsu hook is listed as 4/0 and the Owner hook is 5/0 due to the differences in measuring hook size between the two companies, both these hooks have the same gap. In other words, they both have the same distance between the point and the shank. The plastic spider jigs stay firmly in place with ring type bait keepers so you won’t pull the plastic down even when dragging it over a rough bottom.

Darthead Painted

Revenge Darter Hedz 3pk

The Revenge Darter Headz feature exceptionally realistic detailing on their life-like heads, complete with 3D eyes for added authenticity. A durable chip resistant coating uses color-shifting metallic pigments to imitate real bait and provide long lasting durability. Available in a multitude of color schemes to match your local forage and favorite soft plastic bait. The Mustad Ultra-Point Black Nickel Round Bend Hooks supply rock solid hooksets so more bass end up in the boat.

Darthead Unpainted

Owner Ultrahead Darter Heads 5pk

Putting a worm on a darter head can be a great fish-catching rig, especially for finesse style fishing or when the fish won’t bite a standard Texas-rig. The darter head will hop and bounce along the bottom with fish attracting undulations in the worm and can be quickly and efficiently worked along any bottom that is relatively clear of sticks or grass. With the Owner Ultrahead Darter Heads you have the advantage of a premium fish catching and fish holding hook on the end of your rig ensuring you the confidence of getting the fish into the boat when it bites. If you like using a darter head rig you’ll love these rigs.

Barstow

How to Build a Deck in a Bass Boat


San Bernardino Saltwater Live Bait Tanks

Ontario Livewells

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Ontario, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Ontario with your kids.

fishing bait containers

Ontario Live Bait Well

bait coolers

How Do Self-Bailing Boats Work?

Taitai6769/iStock/Getty Images

A surprising number of boats sink each year due to inadequate safe-bailing systems, whether at dock or out on the water. Self-bailing boats, or self-bailing hulls, are designed to remove water from the boat deck or cockpit area. The water is discharged overboard through the transom, the "back wall" of the boat. Self-bailing, actually being somewhat of a misnomer, means that gravity and momentum are used to rid a boat of unwanted water. There are other systems that provide assistance in eliminating water, and a boat owner should know how each one operates in conjunction with the all-encompassing term of self-bailing.

Ontario

Catching Big Winter Bass


San Bernardino Saltwater Live Bait Tanks

Big Bear Lake 5 Gallon Bait Bucket

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Big Bear Lake, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Big Bear Lake with your kids.

commercial bait tanks for sale

Big Bear Lake Live Bait Well

minnow basket

The Best Lures to Use In Fishing

Screwlock Style Shakey Head

Dirty Jigs Stand Up Finesse Head 5/0 4pk

Finesse fishing has become very popular, and more and more anglers are finding new applications for the technique. The trend of “finesse” fishing with 5" and bigger worms along with craw style baits has gained a lot of attention recently. Dirty Jigs considered this when designing the new Dirty Jig Stand Up Finesse Head. Featuring a larger 5/0 Mustad Ultra Point Jig Hook with a 60-degree flat eye — whether you want to rig a Hag’s Tornado, a Power Team Lures 5" Finicky Tickler or 3.5" Craw D’oeuvre, even all the way up to the Power Team Lures 10" Ribbon Hinge Worm, the Dirty Jigs Stand Up Finesse Head has you covered. Available in several colors, the Dirty Jigs Standup 5/0 Finesse Head also features a recessed line tie to protect your knot and a convenient cork screw keeper.

Traditional Style Shakey Head

Bite Me Finesse Shakey Jig 4pk

Highly effective around pressured or spooked fish, the Bite Me Finesse Shakey Jig provides a scaled-down shakey head presentation that excels on those extra-tough days. Molded around a 2/0 Gamakatsu sproat hook, the Bite Me Finesse Shakey Jig features a short shank that better suits smaller worms, craws, and creature baits. 
 
 To keep those mini plastics locked in place, the Bite Me Finesse Shakey Jig is equipped with a longer-than-normal baitkeeper barb, which also eliminates the need for any messy glues. If the hook keeper is too long, simply trim it back with a quick snip of the cutters. A must-have for targeting finicky bass, the Bite Me Finesse Shakey Jig delivers bite-sized performance that puts fish in the boat when other techniques fall short.

Gamakatsu Ball Head

Gamakatsu Round Jig Head 5pk

Ball heads are useful for a variety of soft plastic baits and these heads feature the ultra-sharp Gamakatsu hooks for positive hookups. Everyone knows about the legendary Gamakatsu hooks and this level of sharpness is exactly what you need especially when fishing with light lines and on deep structure. These heads offer the angler a choice of hook and weight combinations so you can get the perfect Gamakatsu Ball Head for your situation. The double keeper collar means the plastic will stay where it belongs even when you’re pulling it through rough structure and gnarly cover. Use the Ball Head with plastic worms either open hooked or ‘Tex-sposed’, for swimming a grub, for a finesse presentation of a creature bait, or for tying your own jigs. The Gamakatsu Ball Head will give good results every time.

These are authentic product from Gamakatsu, not just someone using Gamakatsu hooks in their heads.

Football Head W/ Weedguard

BOSS Football Jig Head 4pk

The BOSS Football Jigs Head features a custom paint job, large skirt cone and built in plastics keeper. The BOSS Football Jig Head is backed with a 4/0 Mustad Ultra Point Hook in the 1/2oz size and a 5/0 in the 3/4oz. A top grade weedguard is secured, remember not all jig weedguards are the same. All BOSS jig heads feature an unmatched custom 5 step paint job.

For more tips and tricks on rigging skirts check out this video of Gary Klein discussing BOSS Skirting

If you are looking for any skirt material to customize your jigs, don’t forget to check out Skirts Unlimited Skirting Material.

Football Head Plain Style

Yamamoto Football Jig Head Gamakatsu 4/0

Football jig heads are the perfect complement to spider jigs and these Yamamoto Football Heads are a perfect match for the Yamamoto Hula Grubs. The Yamamoto Football Jig Heads come with two different hook choices, a heavier wire, longer shank Gamakatsu hook and a lighter wire, shorter shank Owner hook. Although the Gamakatsu hook is listed as 4/0 and the Owner hook is 5/0 due to the differences in measuring hook size between the two companies, both these hooks have the same gap. In other words, they both have the same distance between the point and the shank. The plastic spider jigs stay firmly in place with ring type bait keepers so you won’t pull the plastic down even when dragging it over a rough bottom.

Darthead Painted

Revenge Darter Hedz 3pk

The Revenge Darter Headz feature exceptionally realistic detailing on their life-like heads, complete with 3D eyes for added authenticity. A durable chip resistant coating uses color-shifting metallic pigments to imitate real bait and provide long lasting durability. Available in a multitude of color schemes to match your local forage and favorite soft plastic bait. The Mustad Ultra-Point Black Nickel Round Bend Hooks supply rock solid hooksets so more bass end up in the boat.

Darthead Unpainted

Owner Ultrahead Darter Heads 5pk

Putting a worm on a darter head can be a great fish-catching rig, especially for finesse style fishing or when the fish won’t bite a standard Texas-rig. The darter head will hop and bounce along the bottom with fish attracting undulations in the worm and can be quickly and efficiently worked along any bottom that is relatively clear of sticks or grass. With the Owner Ultrahead Darter Heads you have the advantage of a premium fish catching and fish holding hook on the end of your rig ensuring you the confidence of getting the fish into the boat when it bites. If you like using a darter head rig you’ll love these rigs.

Big Bear Lake

6 Easy Steps To Make A Nuc Box


San Bernardino Saltwater Live Bait Tanks

Rancho Cucamonga Fishing With Live Shrimp

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Rancho Cucamonga, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Rancho Cucamonga with your kids.

live bait pump

Rancho Cucamonga Live Bait Well

live bait well for kayak

Are You Using the Right Bait?

I began fishing about 4 years ago as a way to relieve stress. I imagined fishing would be like meditating, an opportunity to clear my mind, commune with nature and just relax. Never in a million years did I imagine the dichotomy that exists when fishing . Fishing is so simple, yet so complex. I learned fishing is very relaxing, relieves stress, however, it’s not at all like mediating. When fishing you don’t clear your mind at all, the exact you actually open it, you open your mind to all possibilities. You plan your approach and you anticipate your catch! There are three things I learned through my fishing experiences that I have been able to translate and apply to my business: 1) Tools, 2) Patience, 3) Success.

  • Tools: You absolutely must have the right poles, wire, bait, and tackle. Attempting to fish with the wrong tools, can be unsafe and cause you to be unsuccessful. In order to have the right tools, you have to know where your fishing, what your fishing for and the behavior of that type of fish.
  • Patience: Understanding that fish don’t want to be caught, they are attracted to your bait. It may take a while for them to be attracted or they may be smart enough to nibble at your bait without getting hooked, but either way, while your waiting for something to bite…you have time on your hands to think of other things (formulate better plans), such as how to attract more fish, finding better fishing spots, determining the amount of fish needed to feed your family or my personal favorite…I need to get better at fishing and I wanna buy a boat!
  • Success: If you are able to take everything you have learned, apply it and have fun, then fishing can be one of the most rewarding and relaxing activities, EVER. If you have the opportunity to stare at the water, think, fight and win the battle of reeling in your own dinner it is even more of a success.

In life, no matter what you’re trying to “catch” or “hook”, it’s all about the bait. Think about what you’re trying to catch, research to find out what it likes, locations it frequents, and it’s habits. Then develop a plan to catch/hook it, but, be sure to use the most effective bait based on the behaviors you’ve learned as a result of your research.

For 18 plus years I’ve been teaching executives how to connect w/middle management, managers how to connect w/employees and employees how to connect w/customers. To be successful at connecting or catching/hooking people, you must use bait that IS or APPEARS to be a reward worth pursuing, the bait must have a benefit.

In consulting, we use story telling and experiences (as bait) to communicate and market our expertise. We appeal to clients by showing them we have fished in the same pond and been successful. We guide them with our experiences, make suggestions regarding best fishing practices, and show them how to successfully catch fish.

What bait are you using to hook and reel in your dream job, client, spouse or experience?

Do you have a good understanding of your target audience? Do you know what motivates them? Is your bait irresistible enough to encourage your target audience to learn more about your product/service?

If you aren’t getting the results you desire…..check your bait!!

Are You Using The Right Bait?
I began fishing about 4 years ago as a way to relieve stress. I imagined fishing would be like meditating

Rancho Cucamonga

The Best Lures to Use In Fishing


San Bernardino Saltwater Live Bait Tanks