Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Victorville, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.
Here are some of the thought to make your fishing trip successful in Victorville with your kids.
Victorville Live Bait Well
Great Bass Fishing Tips
DIY Nuc Plans
Beekeeping is a very rewarding hobby, just think about all that delicious, golden honey flowing, mmm! Those of us that have been keeping bees for any time knows that you eventually need to start splitting your hives to prevent them from swarming. Another advantage of splitting is to make a new hive for another beginner to start their own apiary. Perhaps you are an adventurous type and are interested in rearing your own queens.
What ever your motivation is for slitting your hives, you will need the proper equipment to do so. One of the most important pieces of equipment you will need is the box, and that is where your nucs come in very handy. A nuc is a smaller bee box that makes it easier for a fledgling colony of bees to get a strong start. The problem is that they aren't exactly cheap, especially if you are buying several at a time.
This lens is dedicated to teaching you how to make your own nucs!
Step 1: Cutting Your Wood
Making the puzzle pieces
The first step is the most time consuming, especially if you have never done this before. Once you have made a nuc or two, it starts to become a breeze. If you study the picture carefully, it has every piece laid out on a 2' x 4' piece of plywood. Personally, I use 3/4 inch plywood from Lowe's or Home Depot. I tried 1/2 but it didn't seem to hold up on the joints nearly as well. Spend a few extra dollars for the good stuff, your bees will thank you.
Let me list out the dimensions of the pieces, just in case you can't quite read them in the picture. The parts are from left to right:
2 Front Walls - 7 1/2 x 9 1/2 (you will actually get three from the cut outs)
2 Front Tops - 9 x 2 1/2 (these become the handles of the box)
2 Side Walls - 10 1/2 x 19 3/4
1 Top - 9 x 22 3/4
1 Bottom - 9 x 24 (can be shorter if you like smaller landing areas for your bees)
Once you have cut the pieces you are ready to start your assembly. Yes, that's it, no more cutting or routing or anything else!
How to start beekeeping
Here are several books that will teach you everything you need to know about beekeeping, but don't forget, join a local beekeepers guild!
Step 2: Adding Sides
It starts looking like a box
There are several styles of putting the box together, but it really comes down to nails or screws. Nails are a bit easier to use, but the screws will last much longer. Personally, I've chosen to put a bit more effort into it and use the screws.
One word of caution if you do choose to use screws. Due to the fact that you are driving them into the end and side of a laminated piece of wood, it is strongly advised to drill a pilot hole before you actually drive your screws. This will keep the wood from cracking. It is also advisable to drive the screws or nails as straight as you possibly can so you won't have sharp objects poking out ready to impale you. Oddly enough, this tip is more for you than your bees. You will never hear your bees mumbling about the hive about pointy objects that they stubbed their toes on, but you will certainly hear about the beekeeper that ripped his jacket and let a good number of bees sneak in and sting him!
This step would be a tad easier if you had a third arm (as many tasks would) but it really isn't that bad. All you need to do at this point is to attach the sides to the OUTSIDE edges of the front and back. It is important to attach it to the outside or your nuc won't be wide enough to accommodate the five frames you need. I usually use two screws at each joint, you may want to add a third but watch out that you don't apply too much pressure and split the wood.
Step 3: Adding Handles
The handles double as the frame ledge too!
The part I love most about this design is that the handles actually double as the ledge that the frames rest on. Many other designs require that you use routers or other fancy techniques, but this is much easier.
Take the smallest pieces of the cutout and place it on the front flush with the top of the sides. It will overlap slightly with the front panel and the be flush with the outside of the side walls. Screw it in place with one screw on each side. Again, you may want to add an extra screw to give you a warm and fuzzy feeling, but one usually does the trick.
Flip the box over and repeat for the back handle and ledge.
Step 4: Attaching the bottom board
Even bees need a floor
Technically speaking, this step is optional. Sometimes you want to make a second story to a nuc that you already have going. In that case you wouldn't need a bottom board at all. It will simply set on top of the current nuc just like a normal size hive has many boxes stacked on top of each other.
If you do choose to add the bottom, flip the box over and lay the bottom board on it. You need to decide which end will be the front. The extra length of the bottom board will hang over on the front end. This will eventually become the landing pad for your bees. Once again, screw this onto the box, usually one screw on the end and two on each side.
I used to screw on the front until I started ruining my drill bits in the next step. You see, if you put the screw through the center of the front then when you drill the entrance hole you will drill right through your screw. Not a pretty site seeing your bits all chewed up. With a bit of experimentation, I discovered that it doesn't really help much to even have a screw on the front.
Step 5: Drilling holes
The bees need a door right?
The size and location of your entrance does actually matter. First, if you ask 5 different beekeepers what the right size of entrance holes is you will probably get 6 answers. I make my entrances 3/8 of an inch for three reasons: 1) it gives them plenty of room to come and go, 2) it is small enough to defend against pests and robber bees, and 3) most rodents have trouble getting through that size of a hole when seeking shelter.
As far as the location of the front entrance, be very careful when deciding where you place it! I have heard of people leaving up to an inch between the bottom board and the hole. This plan has a solid bottom board which does not give anywhere for water drainage. If you aren't careful, you could end up with an inch of bee soup in the bottom of your hive instead of honey.
I put my front entrance as close to the bottom board as possible. This allows for adequate drainage. The rear entrance is typically an inch or so under the rear handle. I leave this room just in case I need to move the box and a handful of bees have decided to hang out on the back porch. It is important that you do drill both openings, it will provide much better ventilation for the hive.
Step 6: Making the lid
The last step!
The lid is the easiest part of the entire job. Simply take the last remaining piece and screw two pieces of scrap, that you have from the cutting step, to the ends of the top piece and **poof** you have a lid. The only mistake that I have ever made in this step was not doing a test fitting before I screwed the scraps on. It is a good idea just as a sanity check to make sure that the lid will actually fit on top before you screw them down.
Bonus Step: Adding Bees!
Here comes the fun!
While it is rewarding to be able to make your own nuc boxes, it is fairly boring to watch an empty box. Go out and find a swarm or get in touch with your local beekeeping guild so you will have some little critters that call your box a home. They will love your newest creation, I promise!
What makes good nuc boxes?
When you are looking at buying or building a nuc box you should consider a few things. The box should fit snugly with the lid. The last thing you want is to have a gust of wind blow the roof off of your honey bees' house. The lid should also fit flush with the rest of the hive. If there is any bowing of the lid it can lend itself to not keeping crucial heat in during winter months. The entrance should not be too large. It doesn't take much of a space for the workers to come and go, so keep it small so rodents can't get in. It also makes it easier for the bees to protect their hive.
DIY Nuc Box
Why build your own?
The answer is quite simple, it is much cheaper. The nucs that I used to buy, not counting shipping, was about $25. The ones that I make now are $3.50. Holy savings batman!
Beekeeping can become a very expensive hobby. Many people say that there is no money in keeping bees but that isn't really true. The people that shell out tons of cash are the ones that buy overpriced equipment. If you are frugal with this hobby, it will definitely pay for itself many times over.
Nuc Box as a Bait Hive
Catching wild swarms of bees
If you are looking to expand the number of bee hives that you have, a nuc box is one of the best tools you can use. Select a wooded area that is fairly easy to get access to to place your swarm box. Put a piece of old comb in the box with a few frames and strap the box about 10 feet off the ground in a tree. A swarm is more likely to pick this box than other places because it smells like an old hive was there because of the comb and because it is up off the ground.
This method can bring you a few extra hives a year if done correctly. Hey, who doesn't like free bees!
I'd love to hear from you and your experiences making your nucs. Do you have any other plans that you have had luck with? Let me know and I will feature it for you!