Orange County Live Minnow Bait

How Weather Patterns Can Affect Fishing On The Water

Fishing is a great way to spend per day. To become a great fisherman may seem like a difficult task, however, like many skills this simple requires some practice and basic knowledge. There are numerous great spots to go fishing through out the Orange County area, and in nearby mountains. In this short article, we provide several tips to be of assistance in becoming a better fisherman. The following article will show you the best way to increase your haul in such a way that you just never imagined.

Should you use shad and bottom fishing, cut the tail away from the shad before baiting your hook. This prevents the bait from tangling as a result of spin because it goes further in to the water. Moreover, the scent of your cut tail can help to attract fish on it.

Casting on the shore of any river or lake around Orange County can often net the greatest results. Fish who rely on insects for food generally discover them in abundance near to the shore, to have more bites by casting your lure during these areas. However, if you cast close to the shoreline, you must take care not to tangle your line in weeds or debris.

Choose an inverse color for your personal bait in the color of water. Many fisherman prefer to use live bait kept in a live bait carrier, because fresh bait will normally yield better quality fishing. If the water is murky, use light colored bait that it is visible on the fish. On the other hand, if the water is obvious, ensure that you use darker colored bait.

When fishing, sit in the location for at least half an hour before stopping. Oftentimes, you must supply the scent of your bait a chance to travel and you must provide the fish in the water time and energy to locate your line. In the event you don’t wait a minimum of half an hour with this to occur, you could possibly neglect some very nice catches.

Always pack extra supplies of food and water, especially on hot days. Sitting in the sun for several hours at the same time can drain your whole body, so it is essential that you continue it replenished to maintain your power levels. Bring snacks plus some meals, depending on how long you plan to keep out.

live well for kayak

Which means you made our minds up you would like to take up fishing like a hobby. If you are just starting with fishing, you should maintain your equipment pretty simple. It all depends on what you are actually form of fish you are fishing for with regards to equipment. Most beginners begin with lightweight tackle. The main beginner’s equipment will include a rod and reel, 12 lb. test line, small and medium sized hooks (for live bait fishing), several bobbers, a couple of artificial lures, some sinkers, a pair of pliers, a net, along with a pocket knife. Don’t forget to examine your state’s laws to discover should you need a fishing license for the body of water in which you anticipate fishing.

Make sure to use correct casting technique while you are fly fishing. You must have approximately 20 feet of line out before you if you cast. Stay away from jerky motions, and cast a straight line. Above all, try and relax which means that your tense muscles will not likely ruin your casting.

Make sure to match the size of your bait to the size of the fish you are trying to catch. The logic behind this really is simple — small fish pursue small bait, while larger fish will chase larger kinds of bait. Bluegill and Crappie make good bait for larger fish including Muskie and Pike.

Fishing is really a sport with universal appeal. Fishing is the best way to relax and enjoy yourself, in addition to relieving difficulties with anxiety or stress. Successful fishing is often a combination of techniques, patience and luck. If you are using the recommendation you possess read, you might be on the right track to becoming a skilled fisherman.

Fishing Rods Review

the bait bucket

DIY Nuc Plans

Beekeeping is a very rewarding hobby, just think about all that delicious, golden honey flowing, mmm! Those of us that have been keeping bees for any time knows that you eventually need to start splitting your hives to prevent them from swarming. Another advantage of splitting is to make a new hive for another beginner to start their own apiary. Perhaps you are an adventurous type and are interested in rearing your own queens.

What ever your motivation is for slitting your hives, you will need the proper equipment to do so. One of the most important pieces of equipment you will need is the box, and that is where your nucs come in very handy. A nuc is a smaller bee box that makes it easier for a fledgling colony of bees to get a strong start. The problem is that they aren't exactly cheap, especially if you are buying several at a time.

This lens is dedicated to teaching you how to make your own nucs!

Step 1: Cutting Your Wood

Making the puzzle pieces

The first step is the most time consuming, especially if you have never done this before. Once you have made a nuc or two, it starts to become a breeze. If you study the picture carefully, it has every piece laid out on a 2' x 4' piece of plywood. Personally, I use 3/4 inch plywood from Lowe's or Home Depot. I tried 1/2 but it didn't seem to hold up on the joints nearly as well. Spend a few extra dollars for the good stuff, your bees will thank you.

Let me list out the dimensions of the pieces, just in case you can't quite read them in the picture. The parts are from left to right:

2 Front Walls - 7 1/2 x 9 1/2 (you will actually get three from the cut outs)

2 Front Tops - 9 x 2 1/2 (these become the handles of the box)

2 Side Walls - 10 1/2 x 19 3/4

1 Top - 9 x 22 3/4

1 Bottom - 9 x 24 (can be shorter if you like smaller landing areas for your bees)

Once you have cut the pieces you are ready to start your assembly. Yes, that's it, no more cutting or routing or anything else!

How to start beekeeping

Here are several books that will teach you everything you need to know about beekeeping, but don't forget, join a local beekeepers guild!

Step 2: Adding Sides

It starts looking like a box

There are several styles of putting the box together, but it really comes down to nails or screws. Nails are a bit easier to use, but the screws will last much longer. Personally, I've chosen to put a bit more effort into it and use the screws.

One word of caution if you do choose to use screws. Due to the fact that you are driving them into the end and side of a laminated piece of wood, it is strongly advised to drill a pilot hole before you actually drive your screws. This will keep the wood from cracking. It is also advisable to drive the screws or nails as straight as you possibly can so you won't have sharp objects poking out ready to impale you. Oddly enough, this tip is more for you than your bees. You will never hear your bees mumbling about the hive about pointy objects that they stubbed their toes on, but you will certainly hear about the beekeeper that ripped his jacket and let a good number of bees sneak in and sting him!

This step would be a tad easier if you had a third arm (as many tasks would) but it really isn't that bad. All you need to do at this point is to attach the sides to the OUTSIDE edges of the front and back. It is important to attach it to the outside or your nuc won't be wide enough to accommodate the five frames you need. I usually use two screws at each joint, you may want to add a third but watch out that you don't apply too much pressure and split the wood.

Step 3: Adding Handles

The handles double as the frame ledge too!

The part I love most about this design is that the handles actually double as the ledge that the frames rest on. Many other designs require that you use routers or other fancy techniques, but this is much easier.

Take the smallest pieces of the cutout and place it on the front flush with the top of the sides. It will overlap slightly with the front panel and the be flush with the outside of the side walls. Screw it in place with one screw on each side. Again, you may want to add an extra screw to give you a warm and fuzzy feeling, but one usually does the trick.

Flip the box over and repeat for the back handle and ledge.

Step 4: Attaching the bottom board

Even bees need a floor

Technically speaking, this step is optional. Sometimes you want to make a second story to a nuc that you already have going. In that case you wouldn't need a bottom board at all. It will simply set on top of the current nuc just like a normal size hive has many boxes stacked on top of each other.

If you do choose to add the bottom, flip the box over and lay the bottom board on it. You need to decide which end will be the front. The extra length of the bottom board will hang over on the front end. This will eventually become the landing pad for your bees. Once again, screw this onto the box, usually one screw on the end and two on each side.

I used to screw on the front until I started ruining my drill bits in the next step. You see, if you put the screw through the center of the front then when you drill the entrance hole you will drill right through your screw. Not a pretty site seeing your bits all chewed up. With a bit of experimentation, I discovered that it doesn't really help much to even have a screw on the front.

Step 5: Drilling holes

The bees need a door right?

The size and location of your entrance does actually matter. First, if you ask 5 different beekeepers what the right size of entrance holes is you will probably get 6 answers. I make my entrances 3/8 of an inch for three reasons: 1) it gives them plenty of room to come and go, 2) it is small enough to defend against pests and robber bees, and 3) most rodents have trouble getting through that size of a hole when seeking shelter.

As far as the location of the front entrance, be very careful when deciding where you place it! I have heard of people leaving up to an inch between the bottom board and the hole. This plan has a solid bottom board which does not give anywhere for water drainage. If you aren't careful, you could end up with an inch of bee soup in the bottom of your hive instead of honey.

I put my front entrance as close to the bottom board as possible. This allows for adequate drainage. The rear entrance is typically an inch or so under the rear handle. I leave this room just in case I need to move the box and a handful of bees have decided to hang out on the back porch. It is important that you do drill both openings, it will provide much better ventilation for the hive.

Step 6: Making the lid

The last step!

The lid is the easiest part of the entire job. Simply take the last remaining piece and screw two pieces of scrap, that you have from the cutting step, to the ends of the top piece and **poof** you have a lid. The only mistake that I have ever made in this step was not doing a test fitting before I screwed the scraps on. It is a good idea just as a sanity check to make sure that the lid will actually fit on top before you screw them down.

Bonus Step: Adding Bees!

Here comes the fun!

While it is rewarding to be able to make your own nuc boxes, it is fairly boring to watch an empty box. Go out and find a swarm or get in touch with your local beekeeping guild so you will have some little critters that call your box a home. They will love your newest creation, I promise!

What makes good nuc boxes?

When you are looking at buying or building a nuc box you should consider a few things. The box should fit snugly with the lid. The last thing you want is to have a gust of wind blow the roof off of your honey bees' house. The lid should also fit flush with the rest of the hive. If there is any bowing of the lid it can lend itself to not keeping crucial heat in during winter months. The entrance should not be too large. It doesn't take much of a space for the workers to come and go, so keep it small so rodents can't get in. It also makes it easier for the bees to protect their hive.

DIY Nuc Box

Why build your own?

The answer is quite simple, it is much cheaper. The nucs that I used to buy, not counting shipping, was about $25. The ones that I make now are $3.50. Holy savings batman!

Beekeeping can become a very expensive hobby. Many people say that there is no money in keeping bees but that isn't really true. The people that shell out tons of cash are the ones that buy overpriced equipment. If you are frugal with this hobby, it will definitely pay for itself many times over.

Nuc Box as a Bait Hive

Catching wild swarms of bees

If you are looking to expand the number of bee hives that you have, a nuc box is one of the best tools you can use. Select a wooded area that is fairly easy to get access to to place your swarm box. Put a piece of old comb in the box with a few frames and strap the box about 10 feet off the ground in a tree. A swarm is more likely to pick this box than other places because it smells like an old hive was there because of the comb and because it is up off the ground.

This method can bring you a few extra hives a year if done correctly. Hey, who doesn't like free bees!

I'd love to hear from you and your experiences making your nucs. Do you have any other plans that you have had luck with? Let me know and I will feature it for you!


Orange County Custom Bait Tanks

Fishing can be a phenomenal and fun activity for children and youngsters. Fishing can be a very fulfilling sport; you and your family can fish rather than dealing with the hectic routines of day to day life in Orange County, and enjoy the outdoors. Families regularly enjoy the outside air, find out about the earth, and even create great memories. Best of all, fishing is quality time spent together talking, laughing and sitting next to each other. It can be a perfect game for little children, on the off chance that you present it emphatically. For some families, the experience of fishing with live bait, and catching fish that later become dinner, can be a memory making experience that lasts a lifetime.

Here are some of the thought to make your fishing trip successful in Orange County with your kids.

minnow cooler

Orange County Live Bait Well

bait for fishing

The Best Lures to Use In Fishing

I did not go to Smith Island to relax in the quiet of a peaceful fishing village, I did not go to bask in the natural beauty of its marshes; although I certainly did all of those things. I went to learn how the people who have populated the island for centuries in relative isolation go about their lives. What keeps them there? How do they earn a living? What is it like to be a waterman?

Luckily, as I was wandering around the docks on my first evening there, a golf cart sped up and Captain Billy stepped out. After talking for a while he offered to take me out in his boat the next day, something that I cannot thank him for enough. By allowing me to join him on his boat the Miss Frances, and letting me take part in his daily activities — sorting through grass we scraped, inspecting tanks, sitting back in his shed drinking beer and eating crabs — gave me a true sense of island life.

Billy is the last of a dying breed. The watermen once ruled the Chesapeake Bay, but now Tylerton has fewer than 10 living in the village. Billy has worked the waters of the Chesapeake chasing crab in the summer and oyster in the winter for 40 years just like his father before him. He has traced his ancestry all the way back to people sailing from England to the Carribean in the 1700s — surely he is a man who has saltwater running in his veins. He has a wealth of knowledge that extends beyond the reach of most anyone I have ever met. You may think that a waterman is just a fisherman, but you would be wrong with such an oversimplification, as they are so much more in both skills and duties. In addition to bringing in the catch, a waterman must be skilled in: handling watercraft, navigation, carpentry, painting, engine mechanics, radio, weather forecasting, ecology, biology, first aid, and so much more.

Early in the morning when Billy picked me up all was calm on Tyler Creek, the main waterway that runs through Smith Island, but as day broke he pointed to some clouds and said, “you see those clouds there that are breaking up?” I said that I did and he said, “that means wind.” It seemed like an old sailor trick I would have seen in a movie, but within an hour, he was right. during a hard gust he turned to me and said with a laugh, “remember those clouds?!” Later he pointed to a foggy area and said that it would be raining soon, yet again, he was correct. I complimented him on his skill of reading the sky and he told me that some of it you just pick up and some of it was part of his work while in the navy. Over several years he traveled the world and took in the sights of many distant places. Here i was in one of the smallest towns I had ever seen, and I was with someone who had seen more of the world than most people ever get to see. The fact that he chose to return and settle here speaks to the character of the place. The people from Smith Island are not cut off from the rest of the world, the water they live on has opened the world to them.

Billy’s knowledge of aquatic life in the bay is probably greater than many marine biologists. There are two types of crabbing done commercially: potting and scraping. Potting involves setting baited traps and then collecting them. In scraping, a net is cast off the side of a boat and dragged along the bottom of the bay. the net is then lifted, its contents dumped on a table,and sorted through. Billy does scraping. He does it because he can scrape and sort without the assistance of a crew, which is ultimately cheaper. He also believes, and I tend to agree with him, that scraped crabs are sweeter because they have been feeding on natural food as opposed to bait which is often rotting fish. Sorting through the grass I was shown many things I had never seen before. At one point we caught a flounder, he turned it over and showed me recently hatched flounder which looked like something found under a microscope clinging to their mother. We threw it back so that those flounder may have a chance to grow. The watermen use whatever they can. If the flounder was of legal size and without babies it could have made a decent meal for his family. He also showed me several varieties of blowfish, needlefish, flatfish that resembled but were not flounder, spot, shrimp, and many other varieties of fish i had never seen, at one point we even caught a skate. He showed me the different stages of the molting process that crabs go through. He showed me a pair of crabs that were engaging in a mating ritual. He showed me another pair engaged in the act and the two penises of the male crab. He showed me a crab that had lost its claw and was growing a new one under its shell which would grow out as the current one is shed. He showed me the seeds of the grasses which are so essential to his occupation — no grass no crabs.

For as many bad things as Billy had to say about “environmentalists” it would be difficult to find anyone who cares more about protecting the natural resources in the Chesapeake Bay than him. His frustration comes from the ignorance of those who are pushing legislation affecting what he does. He explained that many people think that by scraping his nets along the grass beds he is destroying them, but what he is doing is more like mowing a lawn, the root system remains perfectly in tact. The grass beds he scrapes have been used for over one hundred years and are still perfectly healthy. It is not about simply using the bay. It is stewardship. The watermen take their catch but they care deeply for the bay which gives it to them and want to protect it. Billy explained to me that the marketing of oysters as “cleaners” has allowed sewer pipes to drain into historic oyster beds which have existed since prehistoric times. The oyster rock which had been harvest for centuries disappeared. When the watermen’s union came together the pipe was removed, and within a year oysters returned to the rock.

He told me about a friend of his who went to a meeting where a retired businessman and sport fishermen stood up and said that the watermen are going to take the last rock fish out of the bay. When the man was finished his friend stood and asked the man a series of questions:

“Do you fish?” he asked

“Yes, i love to fish, i go out on my boat every day to fish.”

“And how many rods do you use when you are fishing?”

“At any given time i can have 6 lines in the water.”

“And do you depend on that catch to support your family.”

“No, I am retired, I do it for fun.”

Billy’s friend then said, “Well sir, it is you who will take the last rockfish out of the bay.”

It was clear that Billy is generally frustrated with the government. Who can blame him? He has lived his whole life on an island with no local government, no mayor, no police force, only a volunteer fire department. No one locks their doors. Billy has no memory of a crime ever taking place on the island. Everyone on the island is like family, They look out for each other, and yes they have their disagreements, but at the end of the day they are all on the same island and ultimately have to find ways to live together. He told me his best friend moved to Costa Rica because he was,”tired of America.” Billy considers doing the same, but his wife does not feel up to the move.

Much of his frustration comes from fees which make it more difficult for him to live the life he knows and loves. The fee to have a commercial fishing license is in the thousands, compounded with the registration of his boat and the cost of fuel there is barely a profit to be made on his catch. The regulatory departments which collect these fees have sent a clear message, “go big, or get out.” Regulation of our fragile fisheries are crucial, and the large corporate fishing companies must be kept in check. Corporations harvesting more than the bay can provide must be held accountable. By choking out the independent watermen, we lose the only competition to industrial exploitation of our great estuary, one of the few means of receiving sustainable seafood, and a crucial link to our past.

The docks where he keeps his boat have always been free, but the state of Maryland has claimed them and now charges him rent to use them because they “take care of it,” ironically very little had been done to fix the damage caused by Superstorm Sandy.

Billy told me that scientists have told him that Smith Island is sinking. I asked if he believed them, he said half laughing in his thick accent, “of course I do, its been sinking my whole life, but we’re still here!” I don’t think he could have given a better answer. The people of Smith Island are born and raised in the bay, they eat what comes out it, work hard to earn a living on it, and are eventually buried on land which will one day be reclaimed by the tide. Everything moves in cycles. The people of Smith Island are as much a part of the bay as the brine itself. It is one of the last places in the country, possibly the world, where the people are completely in tune with the place they live.

Orange County

Are You Using the Right Bait?


California Kayak Bait Tank